Green Element

AC12V RGB Controller


Input voltage: AC12V, 

Output volage: AC12V

Power: 600w

CONTROLLER FOR FLAT LIGHT AC

WAKINGLIGHTING

Single Remote Controller ( Suitable for small pool to control up to 4 lights ).

HJ-0010 Detailed Parameters

Battery : 23A 12V

Working Current : 30mA

Receiver Dimensions : 132*52*15mm

Remote Control Radio Frequenc : 315MHz

RF Remote Output Power : 3W

HJ-0010 is a single remote controller for internally controlled RGB underwater light. It has a simple and clear design of 18 buttons. You can choose the desired light color and mode with one button, and switch between 7 static light colors and 5 color shows at will. 10 speeds and brightness are adjustable. External antenna is used to realize wireless remote control of 30m in open areas. It is suitable for small family or commercial swimming pools, and can control no more than 4 underwater lights.

CONTROLLER FOR FLAT LIGHT HENTEK WIFI

Emaux

Terra-Lux Dual-Use Light HIGH ENERGY EFFICIENCY AND ILLUMINATION For underwater or ground surface installation
ENERGY SAVING, AND A WIDE RANGE OF APPLICATIONS
energy while at the same time generates high level illumination from its 3W LED light source. The AISI-316 stainless steel body assures optimum corrosion resistance. The polished stainless steel surface is simply classic and elegant. The high grade ABS plastic niche is also durable and applicable for installations such as in-ground, pool wall, deck surface, and steps.

TERRA LUX LIGHT WALL TYPE

TERRA LUX LIGHT FLOOR  TYPE

Made of white ABS, UVA unalterable and resistant to chemicals common in a pool.
LED lamps of low consumption and high light performance.
Possibility of changes in the colour of the light with programmable cycles.

SWIMMING POOL LIGHT WITH NICH 300W

Pasolite

Milky white and color silicon jacket design,/extremely flexible/100% water proof/power 1ow per meter
Size : 5M/25 METER AVAILABLE
IP Rating : IP 20
Material Type : SOFT RESIN FILLED
VOLTAGE: DC 12V/DC 24 V
Mounting Type : Surface Mounted

STRIP LIGHT 

Hentech

Standard input voltage: 12V AC/DC  5WATT 
Use life: 60,000 hours 16 programs with Synchronization capability
This lamp is designed to be fixed in new pools and/or pools with existing surface mounted lamps that need replacement.
 • This lamp is designed to be used only once. Should it become defective, repair is impossible, and replacement is necessary.
 • The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric components
 which have been inserted or handled at locations other than its own premises.

SPA LIGHT HENTECH 

P10 Series Plastic Underwater Light  
Waterproof Standard: IP68
Cable: 3m
Installation: Wall Mounted (slip in 63mm Class 12PVC pipe)
Material: ABS+ UV Stabilizer

SPA LIGHT EMAUX EYE BALL 

170mm Stainless Steel Fountain Light
Power Options: 15W
Body Material:SS316
Cover Material: tempered glass
Dimensions: Ф170 x 70 mm
Waterproof Way: Structural waterproofing
Waterproof Level: IP68
Model: HJ-FL170-32

FOUNTAIN LIGHT WAKING RING 15W

148mm Stainless Steel Underwater Spotlight
Power Options: 9W/18W/25W
Body Material:SS316
Cover Material: tempered glass
Dimensions: Ф148 mm
Waterproof Level: IP68
Model: HJ-SL148

FOUNTAIN LIGHT WAKING 

LIGHTRO

High Power LED Fountain Light 18W
· Input Voltage : 90 to 265 Vac 
· CRI : >85 
· Light/Lumen output(Lm.) : 2880 
· Dimension (ɸxH) : 7" 
· IP Rating : IP68

FOUNTAIN LIGHT LED 12X1W 

102mm Stainless Steel Wall Mounted Pool Light
Power Options: 5W
Body Material: SS316
Dimensions: Ф102 x 15 mm
Waterproof Way: Resin filled
Waterproof Level: IP68
Model: HJ-WM-SS102

FLAT LIGHT WAKING 5W 

270mm Stainless Steel Wall Mounted Pool Light
Power Options: 18W/25W/35W
Body Material: SS316
Dimensions: Ф270 x 20 mm
Waterproof Way: Resin filled
Waterproof Level: IP68
Model: HJ-WM-SS270

FLAT LIGHT WAKING 40W 

218mm Stainless Steel Surface Mounted Pool Light
Power Options: 12W/18W/25W
Body Material:  SS316
Dimensions: Ф218 x 15 mm
Waterproof Way: Resin filled
Waterproof Level: IP68
Model: HJ-WM-SS218

FLAT LIGHT WAKING 25W 

FLAT TYPE UNDERWATER LIGHT - CP100 SERIES
For concrete and vinyl pools SIMPLE WALL MOUNT WITHOUT NICHE
Product Features
Waterproof Standard: IP68
Cable: 2.5m
Installation: Wall Mounted (Flat Type)
Material: ABS with UV Stablilzer

FLAT LIGHT LED EMAUX 8 W

Made of super bright LED with high quality.
-Acid-proof, alkali-proof and UV resistant.
-The lamp is filled with epoxy inside, which make it 100% waterproof. -Low power consumption, high stability.
-Supports 16 different kinds of color changing programs.
-Long working life up to 60,000 hours.
-Easy to install, suitable for swimming pools, fountains, etc.

FLAT LIGHT HENTEC 55W WHITE 630 LED SS

FLAT LIGHT HENTEC 33W 630 LED ABS

FLAT LIGHT HENTECH 252 LED

Made of super bright LED with high quality.
-12V AC
-Acid-proof, alkali-proof and UV resistant.
-The lamp is filled with epoxy inside, which make it 100% waterproof. -Low power consumption, high stability.
-Supports 16 different kinds of color changing programs.
-Long working life up to 60,000 hours.
-Easy to install, suitable for swimming pools, fountains, etc.

FLAT LIGHT HENTECH 100W SS  

Fiberglass LED Pool Light 35W

Size: 250*60mm  8mm
Material: SS316
LED: 441pcs SMD leds
Power: 35w
Color: single color / RGB and RGBW
Voltage: AC12v
Waterproof class: IP68

Simple introduction:

1. Selected glass, equipped with ultra-high brightness LED as the light source of small power.
2. Voltage: AC 12V.
3. Projection angle rang: 25degrees to 120 degrees optional, the body working operation temperature < 65 degrees.
4. Colours: Red, green, blue, yellow, white, seven colors gradual changing, jumping changing, and others, power switch mode & remote controller pattern for your choice.
5. Spanlife more than 30, 000 hours, low power consumption, environmental protection friendly.
6. IP68.
7. Application: Widely applied into many fields like: Garden fountains, squares surface, water column surface, and outdoor, swimming pool, pond, lake, etc.

FLAT LIGHT GREEN 25CM

8mm LED Pool Light 20W


Product Description:

Ultrathin LED Fountain lights, Ultrathin LED Pool Lights, led pool lights, led pond lights, led spa lights,led slim pool light,slim led pool light

Dimension: D200mm*H8mm 

Specification:

Material:PC

Light color: green,blue,red,yellow,white,RGB

Voltage: DC12V

Watt: 20W 1800LM

Color Temperature:2700k-6500k

LED Chip: SamSung Brand

Waterproof grade: IP68

Beam angle: 120°

Working environment temperature: -25°C~45°C

Control method: Inbuilt driver

Working Lifetime 50,000 hrs

Advantage:

1) Install easily ONLY with 2 screws

2)  Ultra-flat only 8mm slim.

3) Replacing and install by 3 minute(much down the maintain cost)

4) Never don't worry water leaking

5) High brightness LED

6) Available DMX signal

FLAT LIGHT GREEN 20CM 

Ultrathin LED Fountain lights, Ultrathin LED Pool Lights, led pool lights, led pond lights, led spa lights,led slim pool light,slim led pool light

Dimension: D160mm*8mm

Specification:

Material: SS316

Light color: green,blue,red,yellow,white,RGB

Voltage: DC12V

Watt: 10W 800LM

Color Temperature:2700k-6500k

LED Chip: SamSung Brand

Waterproof grade: IP68

Beam angle: 120°

Working environment temperature: -25°C~45°C

Control method: Inbuilt driver

Working Lifetime 50,000 hrs

Advantage:

1) Install easily ONLY with 2 screws

2)  Ultra-flat only 8mm slim.

3) Replacing and install by 3 minute(much down the maintain cost)

4) Never don't worry water leaking

5) High brightness LED

6) Available DMX signal

FLAT LIGHT GREEN 16CM 

Ultrathin LED Fountain lights, Ultrathin LED Pool Lights, led pool lights, led pond lights, led spa lights,led slim pool light,slim led pool light

Dimension: D100mm*H8mm

Specification:

Material:PC

Light color: green,blue,red,yellow,white,RGB

Voltage: DC12V

Watt: 10W 800LM

Color Temperature:2700k-6500k

LED Chip: SamSung Brand

Waterproof grade: IP68

Beam angle: 120°

Working environment temperature: -25°C~45°C

Control method: Inbuilt driver

Working Lifetime 50,000 hrs

Advantage:

1) Install easily ONLY with 2 screws

2)  Ultra-flat only 8mm slim.

3) Replacing and install by 3 minute(much down the maintain cost)

4) Never don't worry water leaking

5) High brightness LED

6) Available DMX signal

FLAT LIGHT GREEN 10CM

ROBUST STEEL ARMS OF POOLS
Ladder handrails are made of φ42mm tubes in polished stainless steel 304 (or 316 for saltwater pools). Correct selection and proper placement of handrails and ladders add a significant measure of safety to every pool area. Three kinds of step are available: Plastic, stainless steel, and stainless steel with anti-slip pads. All ladders are available with anchor or flange type fixtures for easy installation.

Product Features
Handrails is made from polished Stainless Steel 304 or 316(Ф42mm) tube
Steps available in stainless steel and plastic
Complete with anchoring fixtures or flange fixtures

STRAIGHT CONNECTOR FOR HANDRAIL

POOLSUPPLIES

Reduce the strain and effort of rolling up your solar cover with the Sun2Solar® Easy Gear Stainless Steel Cover Reel. This durable and dependable solar reel is designed with a unique gear system that reduces your required effort by 50%. Use the extra time and energy saved relaxing in your pool instead of struggling with a solar blanket.

Note: Reel is not recommended for use with our 1600 series solar cover. Will work with 800 and 1200 series solar covers

Features:

Frame constructed from durable stainless steel
Cover reel tubes measure 3¼" in diameter
Sturdy handle easily allowing for one person operation
Large treaded tires provide for easy maneuvering and makes rolling it out of the way a simple task
Includes all attachment hardware
Measurements:

Reel measures 18" high to the center of the pole
Base measures 22" wide from the outside of the wheels

ROLLER FOR POOL COVER 

SUPPORT FOR HANDRAIL

STRAIGHT HANDRAIL

ROBUST STEEL ARMS OF POOLS
Ladder handrails are made of φ42mm tubes in polished stainless steel 304 (or 316 for saltwater pools). Correct selection and proper placement of handrails and ladders add a significant measure of safety to every pool area. Three kinds of step are available: Plastic, stainless steel, and stainless steel with anti-slip pads. All ladders are available with anchor or flange type fixtures for easy installation.

Product Features
Handrails is made from polished Stainless Steel 304 or 316(Ф42mm) tube
Steps available in stainless steel and plastic
Complete with anchoring fixtures or flange fixtures

GRABRAIL HANDRAIL

EXIT HANDRAIL ARV

EXIT HANDRAIL ARP

EXIT HANDRAIL ARN

EXIT HANDRAIL ARG

EXIT HANDRAIL ARB

EXIT HANDRAIL ARA

END CAP FOR HANDRAIL

CURVED CONNECTOR FOR HANDRAL

LADDER LOWER PART 3 STEPS

STANDARD LADDER EMAUX

ROBUST STEEL ARMS OF POOLS
Ladder handrails are made of φ42mm tubes in polished stainless steel 316 for saltwater pools. Correct selection and proper placement of handrails and ladders add a significant measure of safety to every pool area. Three kinds of step are available: Plastic, stainless steel, and stainless steel with anti-slip pads. All ladders are available with anchor or flange type fixtures for easy installation.

Product Features
Handrails is made from polished Stainless Steel 316(Ф42mm) tube
Steps available in stainless steel and plastic
Complete with anchoring fixtures or flange fixtures

OVER FLOW LADDER EMAUX 316

ROBUST STEEL ARMS OF POOLS
Ladder handrails are made of φ42mm tubes in polished stainless steel 304 . Correct selection and proper placement of handrails and ladders add a significant measure of safety to every pool area. Three kinds of step are available: Plastic, stainless steel, and stainless steel with anti-slip pads. All ladders are available with anchor or flange type fixtures for easy installation.

Product Features
Handrails is made from polished Stainless Steel 304 (Ф42mm) tube
Steps available in stainless steel and plastic
Complete with anchoring fixtures or flange fixtures

OVER FLOW LADDER EMAUX

MURO LADDER EMAUX

INCLIEND LADDER EMAUX

Aqua

Manual mixer produced by the Italian company AQUA, designed for mixing various chemical reagents (acid and alkali solutions) in tanks. They are intended for installation on a working container for the purpose of preparing and maintaining chemical reagents in a condition suitable for pumping by pumps. Containers are attached from above. The mixer is made of PVC. The Aqua A-TANK-1 capacity of 100 liters is suitable for this mixer.

MANUAL MIXER PVC SHAFT 60CM

Astralux

MONOPHASE OR TRIPHASE MIXERS

The mixer is used with size tank from 100 l to 1000 l.
The gear box (lubrification free) is coupled to the tank fixing flange.
The main axis is made in stainless steel and covered in PVC.
The seal against chemical vapour is a Fluorocarbon rotary seal inserted between the flange and the PVC cover of the shaft. This protects the gear box and the motor from chemical vapour.

MOTORIZED MIXER

Seko

SEKO’s solenoid dosing pumps are the smart choice for water treatment processes where precise, consistent chemical dosing is essential. From potable water treatment systems to chemical dosing for agricultural applications, you’ll always find a perfectly-matched solution within our comprehensive solenoid-driven dosing pumps range.

Powerful microprocessor technology guarantees dosing accuracy, while wall and base-mounting options, constant and proportional dosing and analogue and digital variants provide unrivalled choice. Most of these solenoid diaphragm pumps can even be used without performance loss in locations with no access to mains electricity or where power supply fluctuates courtesy of SEKO’s stabilised multi power supply.

The use of premium materials such as PVDF and food-grade PTFE in the liquid end components gives our solenoid dosing pumps the flexibility to be used in multiple applications, as they have high resistance to a variety of aggressive chemicals including highly-corrosive substances such as acids.

With just a single moving part, these diaphragm pumps are virtually wear-free and require no lubrication of bearings or shafts, minimising maintenance requirement and repair costs whilst offering excellent continuous-running characteristics.

DOSING PUMP SEKO

Infinity

6 LPH @ 4 bar Pressure
Infinity positive displacement diaphragm metering pump operating at 230V, 50Hz supply.
It is base mountable. Solenoid push the diaphragm which in turn pushes the liquid into the system.
Solenoid is actuated by a solid state electronic circuit. It has controls for the desire accuracy of the dosing. Dosing rate @ 4 kg/cm²: 6.0 LPH (IDP 6)
Suction/Discharge tubing: 4/6 mm
Frequency: Up to 400 SPM
Electrical: 230V AC, 50 Hz
Power Consumption: 30 Watts
Fuse: 500mA / 230V AC
Pump Stroke per minute: 120 Max ( Adjustable)
Negative Suction: 1 Mtr
Environment Temperature: 40°C Max
Head: HDPE
Diaphragm: Teflon (PTFE)

DOSING PUMP INFINITY 5L/8BAR DIGITAL WITH FLOAT

DOSING PUMP INFINITY 5L/8BAR

The Etatron AP range of piston dosing pumps are designed for applications requiring larger precise flow rates up to 190L/hr and higher pressures up to 20 bar. This range is not suitable for use with liquids containing abrasive or solid particles. This metering pump series can be controlled in various ways depending on application requirements, including; 4-20 mA signal and inverter control.

The metering pump head is available in either PVC, PVDF or stainless steel AISI 316 depending on the nature of the fluid. Seal materials options include; NBR, FPM and EPDM. This combination of materials options make this pump range suitable for a wide range of fluids and applications.

This dosing piston pump series is ideal for many applications in the industrial and marine markets, including; chemical dosing for maintaining PH levels in water treatment processes, Legionella dosing, biocides,  OEM dosing systems, reverse osmosis, chemical injection and chemical dosing for agriculture.

PISTON DOSING PUMP

The Etatron AP range of piston dosing pumps are designed for applications requiring larger precise flow rates up to 190L/hr and higher pressures up to 20 bar. This range is not suitable for use with liquids containing abrasive or solid particles. This metering pump series can be controlled in various ways depending on application requirements, including; 4-20 mA signal and inverter control.



The metering pump head is available in either PVC, PVDF or stainless steel AISI 316 depending on the nature of the fluid. Seal materials options include; NBR, FPM and EPDM. This combination of materials options make this pump range suitable for a wide range of fluids and applications.



This dosing piston pump series is ideal for many applications in the industrial and marine markets, including; chemical dosing for maintaining PH levels in water treatment processes, Legionella dosing, biocides,  OEM dosing systems, reverse osmosis, chemical injection and chemical dosing for agriculture.





Product Summary 



•                      Etatron AP series piston metering pump

•                      Larger precise flow rates up to 190 L/hr

•                      Discharge pressures up to 20 bar

•                      10% to 100% stroke length adjustment

•                      Pump head available in  PVC, PVDF  or stainless steel AISI 316

•                      Seals available in NBR, FPM or EPDM

•                      Fitted with either single or double ceramic ball valves

•                      4-20 mA control possible with optional servo motor mechanism

•                      Level control supported

•                      Can handle fluids with viscosities up to 2000cp

•                      Self-priming

•                      120 strokes per minute maximum

•                      Aluminium casing with epoxy/acid proof coating

•                      IP55 motor protection

•                      Single phase 230V, 110V or three phase 230/400V 50/60Hz motors available

•                      Available with Atex motor for installation in non-safe areas

•                      Available with motors suitable for operation via external inverter (variable frequency drive VFD)

DOSING PUMP AQUA PH W/O PROB

AQUA HC997 is multifunction solenoid driven dosing pump with constant and proportional dosing with push buttons interface and digital LCD display for programming.

General Specifications:

LCD Display with Backlight
5 pushbutton interface
Constant Mode: flow rate, time, quantity, cyclic
Proportional Mode: 4-20mA input, pulse input, PPM
Time Mode: Daily or Weekly
Alarm: Level & Flow
Relay output
Maximum Flow 14 l/hr @ 0 bar
Maximum Pressure 20 bar @ 2 l/hr
Tube Connection Size 4mm x 6mm
Power Supply 230VAC
ON / OFF Switch
Level Input (pump interlock)
Wall & Bench Mounting Kit
IP65 Rating
Wetted Parts:

Pump Head PVDF
Ball Valves PTFE
Valve Body PVDF
Fittings PVDF
Injection Valve PVDF, Hastelloy, PTFE
Foot Valve PVDF
Seals Viton or EPDM

Top Categories

Cooperation