Pentair

Emaux

Green Element

Watts

Infinity

Jacobi

Pool China

In-ground pool cover reel with s/s frame for 3'' tubes

STAINLESS STEEL BRISTLE CORNER VACUUM BRUSH WITH ADJUSTABLE VACUUM RING
VACUUM HEAD are made of robust PA / Aluminium materials. These models are designed for heavy-duty use and have a strengthened handle and flexible wheels

STAINLESS STEEL CORNER BRUSH

Wall Return and Floor Inlet are manufactured from ABS and PVC plastic by injection moulding. The high quality of materials and the rigorous controls of production processes guarantee a long life for our equipment.

MAIN DRAIN EMAUX 63

High Flow Plastic pumps.
Centrifugal electric pumps for swimming pools, with built-in pre-filter, ideals for high flow at low pressure.
Pre-filter with transparent lid in polycarbonate which allows easy observation of the pre-filter basket. The pre-filter is closed with a knob system of easy accessibility.
Pump body and pre-filter made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time.
Bronze, plastic or stainless steel impeller, according to model.
Motor shaft manufactured in stainless steel AISI 316L.
Pre-filter basket in stainless steel too.
Motors with IP-55 protection, at 2.850 r.p.m. Tension of mains feed at 230/400V-50Hz or 400/690V-50Hz (7,5, 10 and 12,5 HP) three-phase.
Versions from 4HP to 12,5HP.
Possibility of AISI 316L stainless steel impellers upon request.

SWIMMING POOL PUMP IML ATLAS SERIES

Manufactured in ABS plastic
    It has fixed plate with screw to hold on the 20 mm eyeball
    Max flow rate 4.5 m3/h
    1.5" BSP Male Thread – 50 mm long

WALL INLET 1.5"

High-flow centrifugal pump. Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time. Impeller in Noryl. Mechanical seal in graphite and ceramics. Motor shaft manufactured in stainless steel AISI 316L. 3CV single-phase motors at 230V-50Hz, or three-phase 3HP, 4HP or 5,5HP at 230/400V-50Hz motors, all at 2.850 r.p.m. and IP-55 protection. Possibility of 60Hz upon request. Connections of suction and return at 3 ½” for Ø 75 mm bush connections. Bush connections included with the pump.

COUNTER CURRENT PUMP FOR SPA  IML

Feature：
● Technology corona discharge quartz ozone cel.
● Cooling way:air /water cooling
● Over heat,over temperature,over voltage protection.
● High ozone concentration output:assemble air and water cooling quartz ozone tube for larger
modes,both with internal and external electrodes cooled,large cooling area,easy heat dissipation,low temperature rise and high efficiency.
● With refrigerant dryer for cooling air which can protectozone unit for long service life in good working condition.
● With timer:12o minutes /ozone output adjustable

OZONE GENERATOR AIR SOURCE

WAKINGLIGHTING

270mm Stainless Steel Wall Mounted Pool Light
Power Options: 18W/25W/35W
Body Material: SS316
Dimensions: Ф270 x 20 mm
Waterproof Way: Resin filled
Waterproof Level: IP68
Model: HJ-WM-SS270

FLAT LIGHT WAKING 40W 

Emaux high capacity feeders offer a user- friendly solution for sanitizing large residential and commercial swimming pools using either chlorine or bromine tablets. They are heavy duty and able to provide automatic sanitization for pools up to 608,000 liters. Both in-line and off-line plumbing installations are available in 2 sizes.
MODEL: CLL-50 (In-line)
10 ppm —– 95000L pool
5 ppm —— 190000L pool
2.5ppm —– 380000L pool
MODEL: CLL-75 (In-line)
10 ppm —– 152000L pool
5 ppm ——- 304000L pool
2.5ppm —– 608000L pool

IN-LINE CHLORINE FEEDER 6 KG EMAUX

Hentech

Standard input voltage: 12V AC/DC  5WATT 
Use life: 60,000 hours 16 programs with Synchronization capability
This lamp is designed to be fixed in new pools and/or pools with existing surface mounted lamps that need replacement.
 • This lamp is designed to be used only once. Should it become defective, repair is impossible, and replacement is necessary.
 • The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric components
 which have been inserted or handled at locations other than its own premises.

Categories

Categories

Categories

Brands

Brands

Top Categories

Cooperation