Oceanic

STEAM CONTROLLER OCC

Emaux

A zinc sacrificial anode provides a shield that protects bathers from the risk of electric shock, especially in fiberglass pools that lack metal bonding. Equally, when saltwater chlorinator disinfection systems are used, it prevents electrolytic corrosion of metal pool parts such as stainless steel ladders, heat pump, heat exchangers, UV-C stainless steel casing, stainless steel lighting niches, and face rings, aluminum pump motor housings, and salt chlorinator titanium cell plates.

IN-LINE ZINC ANODE

Introducing the H&V Controls 15mm Electrolytic Limescale Reducer, the perfect solution for hard water issues in your home! This innovative product utilizes advanced electrolytic technology to effectively reduce limescale buildup in your water system, ensuring longevity and efficiency of your appliances and plumbing fixtures. With its compact design, the 15mm Electrolytic Limescale Reducer is easy to install and maintain, and will provide long-lasting reliability. Say goodbye to the constant need for cleaning and descaling, and enjoy the benefits of softer water!

STEAM LIME SCALE INHIBITOR

This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks,pools, water towers of the industry and civil construction, etc.
Automatic control, low self-complementary water, water full automatic stop.
Beautiful appearance, small size, practical, simple installation,Without electricity, easy to use, long life, low failure rate, saving water resources.

Suitable for water tower pools, solar energy, hot water boilers, aquaculture, food machinery humidifiers, water heaters, livestock water and swimming pools, etc.

MECHANICAL FLOAT VALVE

Descriptions: hypochlorite dosing system includes dosing pump and residual concentration monitor The chlorination system should regulate the quantity automatically equipped according to the concentration of water chlorine. A single dose of 17 l/h, the mold of the polypropylene pump, fluoride rubber seals, ceramic ball valves, diaphragm, very reliable work dosing pump electroico diaphragm is a kind of dosing pump, the dosing pump is a special volumetric dosing can be pumped fluid. It usually consists of a control section, the conductive part, transmission parts and overcurrent components, electrolytic diaphragm dosing pump other than another dosing pump is mainly driven.
Electrophragm dosing pumps in quality mainly in the following aspects:
1. Select material: As is usually highly corrosive liquid dosing pumps, so for corrosion-resistant materials and transported directly to the liquid in contact with high demand. Its selection of materials and structural elements in the principle of selection of materials from the sealing element is corrosion properties, material processing properties and the like.
2, the structure of the pump head: head for the measured liquid flow part, its quality is good or poor performance in general rational structure, sealed, corrosion resistance.

MECHANICAL DOSING PUMP  17.4 L/ 4 bar

The new OSX system offers myriad features controlled through a simple touch screen interface. From selecting duration and temperature of a single session to setting up a fully automated weekly schedule with auto descale and steam on demand options it has never been easier to enjoy your steam room than with our new OSX touch screen control system.

    4 modes of operation including Automatic and Steam on Demand
    Calendar set up for auto descaling and automated operation
    Dimmable lighting control
    Screen Lock
    Fan control
    Status and warning
    Language and unit options

STEAM CONTROLLER OSX 7" TOUCH SCREEN

High-quality 304 stainlesssteel made by polishing, high-temperatureoil sealing, scientific surfacetreatment to prevent the lamp body rust, extended service life.

FLAT LIGHT LUX 23CM S.S 18W 

POOLUX

FLAT LIGHT LUX 15CM S.S 18W 

Features:
• Easy-to-use portable turbidimeter is equipped with a large LCD display.
• 2 to 5 points calibration using the Formazin Standards.
• Selectable four turbidity units, including the NTU (Nephelometric Turbidity Unit), FNU
 (Formazine Turbidity Unit), EBC (European Brewery Convention) and ASBC (American
  Society of Brewing Chemists).
• Single measurement model automatically recognizes the stable reading.
• Continuous measurement model that can used for indexing and matching the sample vials.
• Auto-Power Off helps user effectively conserve battery life.
• System menu allows setting the 7 parameters, including the date and time, resolution, etc.
• Reset feature automatically resumes all settings back to factory default options.
• Expanded memory stores and recalls up to 100 readings.
• Stored data can be transferred into computer by USB communication interface.
• Multi-mode power scheme (battery, power adapter, USB port) ensures that use the meter
  smoothly.

Specification
 Model 	TB100
   Measurement Method 	ISO 7027 nephelometric method (90°)
   Measurement Range 	0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC
   Resolution 	0.01 (0~100 NTU), 0.1 (100~999 NTU), 1 (999~1100 NTU)
   Accuracy 	±2% (0~500 NTU), ±3% (501~1100 NTU)
   Calibration Standards 	0.02, 10.00, 200, 500, 1000 NTU or User-Defined
   Light Source 	Infrared-emitting diode (850 nm wavelength)
   Detector 	Silicon Photodiode
   Stray Light 	< 0.02 NTU
   Sample Vials 	60(H)×25(Dia.)mm
   Power Off 	Manual or Automatic (15 minutes)
   Memory 	Stores up to 100 data sets
   Output 	USB Communication Interface
   Operating Temperature 	0~60°C
   Power Requirements 	1×9V Battery
   Dimensions 	180(L)×85(W)×70(H)mm
   Weight 	300g

TURBIDITY METER

About this item

    Intelligent Control The electronic control pump control arranges the automatic start and stop of the pump when opening or closing a faucet or valve of installation.
    CONSTANT PRESSURE When the pump starts, it will stay in operation while the opening of each faucet continues, thereby transmitting a constant flow and pressure to the mains.
    SPECIAL SENSOR The control pump has a special patented sensor whose task is to maintain the connection of the pump as long as there is a minimum consumption of 0.8L/min.
    INLET AND OUTLET The inlet and output size of the control pump is 1 inch
    Famous brand: The product is from the brand Automatic Pump Control, which is known for its high quality and performance.

  Report an issue with this product

PRESS CONTROL

Pressure Switch is a compact, reliable and economical pressure switch used by many industries in their process control systems. This Pressure switch has a measuring Range of up to (0 – 6 bar). This Pressure switch is activated when the pressure of fluids, air, and gases reaches a threshold or setpoint and helps the user to run the processes smoothly and effectively.
Applications: compressed gas systems, HVAC, instrumentation systems, pumping systems, and so on.

LOW PRESSURE SWITCH-DANFESS

LOW PRESSURE SWITCH

FEATURES

Wide setting range
Shock and impact resistant
Snap action electrical contacts minimize chatter, bounce, and wear, and ensure long term electrical and mechanical reliability
Small dimensions. Space saving – easy to install in panels
Electrical connection from front of the unit makes rack mounting easier and also saves space
Suitable for alternating current and direct current
Single pressure switches and thermostats are fitted with a single pole double throw contact system (SPDT),
Can be used for both liquids and gases (KPI)
Manual trip function enables electrical connections verification without any tools or pressure changes in the application

TECHNICAL DETAILS:

Adjustment Range: 6 – 20 Bar
Differential: (min) 0.5 bar – (max) 2 bar
Fluid: Gaseous media and liquids
Ambient temperature [°C] -40 – 65 °C (for max. 2 hours up to 80 °C)
Media temperature [°C] -40 – 100 °C
Connection: G 1/4 A
Max working pressure: 18 bar

HIGH PRESSURE SWITCH DANFESS

HIGH PRESSURE SWITCH

Water Level Switch
This product is designed to guarantee performance and reliability. for over 40 years millions of customers have been relying on RADAR's products to meet their needs.
ST-70AB liquid level control switch is applicable to all kinds of water tanks for maintaining liquid levels. It may be used to control water either inflow or outflow by direct pump control or to control magnetic starter switch.
<
Specifications

    Power: 110/220V, 50/50HZ
    Max.Pump Power By direct Control: 1.0HP
    Connection : 1'' G. 3/4''G
    Mounting: Vertical Installation
    Control Range: 0.2-5.0 Meters
    Temperature Limit; 5~60C

FLOAT-RADAR

Product Description

Float level switch is a simple structure, easy to use level control device, it does not need to provide power,

no complicated circuit, it has a smaller than the general mechanical switch, long life and other advantages 
Material 	Stainless Steel
Point capacity 	50W
Resistive load 	107 times
Switching voltage 	220VAC/200DC
Working temperature 	±10~120ºC
Switching current 	0.5A
Insulation resistance 	>10Ω
Contact impedance 	<100m
Switch material 	SUS304
Working pressure 	<1.0MPA
Installation method 	horizontal type

ELECTRIC FLOAT SS

Description

A float switch is a device used to detect the level of liquid within a tank. The switch may be used with a pump, an indicator, an alarm, or other devices. These Float Switches are used for Water Level, liquid level Controller etc

The Float Level Switch is made of chemical resistant polypropylene. It is durable, low-cost, and specially designed to solve the long range, multi-points level detection in liquid and liquid with pump or granule instances.

The Cable Float Level Switch is with simple structure of using micro switch or proximity switch or reed switch to control the contact and it is user friendly design for level measurement. The switches will send out ON or OFF contact signal output when the floating angle is larger than a certain degree where the state of the iron ball and reed switch will be changed for actuation.

ELECTRIC FLOAT

Industrial Inline Water Resistivity Meter / Conductivity Meter & Controller

    Measurement range: 0.05-18.25MΩ., 0.05-20 μS/cm, Probe's constant: 0.010 C (CON3131-13)
    Complete Set of Resistivty Meter & Probe Sensor (CON3131-13).
    Meter Resolution: 0.01MΩ.
    Display: High illumination, pure white backlight LCD display.
    Power Supply: AC 85-260V X DC 24V (Transformer included), Safe, accurate and low maintenance.
    Control Mode: Double contact relay output (ON/OFF), SPDT relay.
    Transmitting output: (4~20mA).
    CCT-3300E is a new developed conductivity / TDS integration controller.
    No adjustable component inside the instrument, totally programmed automatic calibration, higher reliability.
    Working temperature: 0-50 C.

 

Applications:

    CCT3300E is widely used for monitoring of all ultra-pure water process, Deionised DI water applications, Reverse Osmosis units, Demineralized water plants ... ect.
    Pure / ultrapure water measurement control, widely used for electronic, electric, pharmaceutical, fine chemistry, clinical medicine, life science, chemical industry ....

 
Installation:

    Panel mounted ,fast installation clamp. 
    Dimensions: 48mm×96mm×80mm(H×W×D).
    Slot dimensions: 44mm×92mm(H×W). 
    Weight 0.27kg. 
    Conductivity probe installation: NPT 1/2" Thread.

 
Water Conductivity Resistivity Probe (included):

    Conductivity Probe / Conductivity Sensor / Conductivity Electrode. 
    Material: Stainless steel, Graphite and plastic.
    Model: CON3131-13 / 5m cable, Cell constant: 0.010cm-1 (0.05-18.25MΩ., 0.05-20 μS/cm).
    Installation: NPT 1/2" Thread.
    Other Probes are available, check with us.

RESISTIVITY MONITER PANEL MOUNTED

The Reverse Osmosis Controller (RO Controller) CCT-7320 is a combined control instrument of a reverse osmosis controller and an on-line conductivity meter. The RO controller can perform the operation test, status control and on-line monitoring of water quality conductivity (combining PLC controller and conductivity meter). It takes multiple anti-interference measures, adopts unique process flow and graphical control panel with LED indicator lamp embedded, the interface is friendly; menu-driven operation is used, multiple groups of parameters can be set and modified, the requirements of automatic operation are met.
Process Flow Selections
There are two typical operation modes for RO system (as shown in Fig.1A and B). This instrument can operate in both modes in A and B.
Technical Specifications:
1. Power voltage: AC 220V±15%  50Hz       Power consumption: ≤3W
2. Environment conditions: 1) temperature: 0～50℃;   2) humidity: ≤85%RH
3. Measuring range: 0～20μS /cm，0～200μS /cm，0～2000μS /cm （Fixed range which has been set by the manufacturer and can not be changed by customers: Please indicate which measure range will be needed before placing an order. 200μS /cm or 2000μS /cm ? The ex-factory standard is 0-200μS /cm without prior indication. Except the range, please also let us know you need high pressure flush or low pressure flush program before placing an order）
Note: 0～2000μS /cm is suitable for the equipment with conductivity of the outflow water 100～2000μS /cm,  with conductivity lower than 100μS /cm, measure range 0～200μS /cm or 0～20μS /cm should be selected.                                       Accuracy: 1.5 level
4. Load capacity of output contact: 3A/250V AC (the magnetic valve should be driven through intermediate relay)
5. Operation pressure of conductance cell: 0～0.5Mpa
6.Medium temperature:5～50℃
7.Temperature compensation: automatic temperature with 25℃ as reference temperature
8. Distance of measuring range: less than 30m (the ex-factory configuration of electrode cable is 5m unless there is a special agreement)
9. Display mode: 3 1/2-digit LED digital display
10. Electrode selected: 1.0cm-1
11. outline dimensions: 96×96×110mm (height×width×depth)
   meter board hole: 92×92mm (height×width)

R.O CONTROLER CCT 7320

Capacity

    A9 1-1 : 2HP 1 ф (RWP) | 3HP 1 ф (HPP)
    A9 1-3 : 2HP 1 ф (RWP) | 4HP 3 ф (HPP)
    A9 3-3 : 3HP 3 ф (RWP) | 5HP 3 ф (HPP)
    A9 HD 3-3 (3-7.5) : 3HP 3 ф (RWP) | 7.5HP 3 ф (RWP)
    A9 HD 3-3 (5-10) : 5HP 3 ф (RWP) | 10HP 3 ф (RWP)
    Miscellaneous : 0.5 HP 1 ф SV / DP / UV

NOTE: A9 Series Every models can Customise
with GSM & AUTO MPV Features

Display

    16x2 Alphabetical Blue / White
    Power Input Voltage
    Total Plant Run Hours
    Online TDS & Conductivity
    RWP Pump Ampere
    HPP Pump Ampere

TRIPPING

    Over & Under Ampere Tripping
    Dry Run Tripping
    RWP & HPP Single Phase Tripping
    Low / High Pressure & Level Tripping

PROTECTION

    Over & Under Ampere
    Over & Under Voltage
    RWP/ HPP Dry Run
    Single Phasing
    Reverse Phasing
    Phase Unbalancing
    Low Pressure
    High Pressure
    RAW Tank Low Level
    Treated Tank High Level
    Dosing Tank Low Level

INPUT

    (RWT) Raw Water Tank Floaty
    (TWT) Treated Water Tank Floaty
    (LPS) Low Pressure Switch
    (HPS) High Pressure Switch

OUTPUT

    (RWP) Raw Water Pump
    (HPP) High Pressure Pump
    (FSV) Flushing Solenoid Valve
    (DP) Dosing pump
    Auto MPV

SIZE

    308mm(H) x 308mm(W) x 145mm(D) : Overall Size
    283mm(H) x 283mm(W) : Cutout Size

FEATURES

    Auto & Manual Facility Inbuilt
    Complete RO Logic Pre Program
    Automatic Slow & Fast Flushing Facility Inbuilt
    heavy Duty Terminals for Wiring
    Alphabetical 16x2 Blue / White LCD Display for Batter visualization
    Password Protection Facility for Plant Safety and Security
    Voltage, Ampere, Dry Run, Single Phasing, Pressure & Level Tripping Facilities Inbuilt
    Display Continuously Scrolling with Total Plant Run Hours, TDS, RWP / HPP Pumps Ampere
    Provision for Every Types of Auto MPV & GSM Facilities Optional

R.O CONTROLER A9 INFINITY

RO CONTROLLER A5 1-1
Specification

SUITABLE UP TO 1000 LPH RO SYSTEMS
Online TDS / Cond, AMPERE, VOLTAGE, PLANT HOURS,
AUTO FLUSHING FACILITY, PUMP DRY RUN, PHASE PREVENTION
ALL TYPE OF AUTO MPV SUPPORTED.
AMPERE, VOLTAGE, LEVEL/ PRESSURE PROTECTION.

A5 1-1 Auto :- 2HP(I) RWP/ 3HP(I) HPP
EXTRA:- 0.5 HP(I) DP/ 0.5HP(I) FSV
CUT OUT SIZE:- 215 X 190 mm

R.O CONTROLER A5-1-1

Large LCD Screen & Monitor Flow Rate
Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.


Quantitative control
Controller will turn off the solenoid value automatically when flow reach to the setting value you desire.

 Work with all hall effect flow sensor
It can work various different flow sensor through adjust the K value
TECHNICAL SPECIFICATIONS
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC, Output: 12VDC, max 2A
Adapter lead length: 1m
Measuring Accuracy: ±1%
Output for Solenoid valve: 12VDC, max 2A
Temperature Sensor: 0-100℃/32-212℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
Max Total Volume : 999999 G/L
Quantitative Range: 0-9999 G/L
Flow Rate Range: 0-9999.99/LPM(GPM)
Cable Length : 1m
Dimensions: 88mmx126mmx30mm
Weight: 200g
Operation Environment: Temperature: 0-50℃/32-122℉ Relative Humidity: <85%

For G1" Flow Sensor:
Flow range:1-60L/min
Allow compression:Water pressure 1.75 Mpa below
Sensor:Hall effect
Cable length:15cm
Frequency: F=4.8 * Q (L / Min)

For G1" Solenoid Valve:
G1",thread male outer diameter: 32.5mm
Working pressure:0.02-0.8Mpa
Working Voltage:DC12V

DIGITAL FLOW METER - CONTROLLER

FLOW SWITCH AQUA

The water flow sensor is mainly composed of a plastic valve body, a water flow rotor assembly and a Hall sensor.
It is installed at the water inlet end of the water heater to detect the water flow. When the water passes through the water flow rotor assembly, the magnetic rotor rotates and the speed changes with the flow. The Hall sensor outputs the corresponding pulse signal, which is fed back to the controller. The device judges the size of the water flow and controls it.

Product Paramenters
Product Name
	
Water flow sensor
Rated working voltage
	
DC4.5 5V-24V
Maximum working current 
	
15 mA (DC 5V)
Operating voltage range 
	
DC 5～18 V
Load capacity
	
≤10 mA (DC 5V)
Operating temperature range 
	
≤80℃
Operating humidity range 
	
35%～90%RH (no frost)
Allowable pressure water pressure 
	
below 1.75Mpa
Storage temperature
	
-25～+80℃
Storage humidity 
	
Storage humidity 25%～95%RH

FLOW SENSOR INFINITY

Infinity Flow meter controller has a flow sensor with magnetic
multi-blade spinning rotor(impeller) mounted inside at right angles to the
flow. The rotational speed of the impeller is proportional to the velocity
of the fluid. The pulse generated is transmitted and converted into
volumetric measurement. These controller are calibrated and to give
reliable flow measurement
FEATURE
Easy Size Selection OF Flow Sensor’s
7A / 230V Relay For Every Tripping
Alphabetical 16×2 LCD Display for Easy Monitoring
Two different size OF Flow sensorS can connect & monitor
Display can show Total Volume in liter as well m³
15mm, 20mm, 25mm, 40mm, 50mm different sizes can Support

FLOW CONTROLLER INF

Product description

Liquid reagent Total Hardness I: content 20 ml for determining total hardness for the electronic pool water tester PoolLAB. Professional water analysis for private pools and hot tubs. To determine the total hardness, both reagents are required (I & II).

The total hardness is the sum of calcium and magnesium ions dissolved in the water.

The PoolLAB measures the total hardness in mg/l (ppm) CaCO3 (calcium carbonate). The value can be converted into German hardness (°dH) by multiplying it by the factor 0.056.

The higher the total hardness, the greater the risk of water turbidity and limescale deposits. The higher the pH value in the water, the higher the risk of turbidity and limescale loss.

For the total hardness measurement with the PoolLAB both liquid reagents are always required: Total Hardness I conditions the water sample e.g. Adjust the pH value of the water sample so that the reagent II can react correctly. Total Hardness II is the actual reagent, which causes the colour development necessary for the measurement process.

REFIL FOR HARDNESS POOL LAB 1

Tech Specs

    ENJOY HARDNESS TESTKIT Drop-per-Drop (DPD) style multi-use hardness test
    3 grain-per-gallon resolution on hardness test
    Hach™ pH dip strips
    Hach™ Total iron reagent + dip strips

In the Box

    1 x Hardness Test Kit
    pH Test Strips
    Total Iron Test Strips
    Calipers

HARDNESS TEST KIT ENJOY

Total water hardness test kit comes with total hardness in PPM or grains, test vial, 1/2-ounces No. 6, 1-ounce No. 7 and instructions, compact box. Includes 1 kit per pack. Complete 11 test lab designed for service professionals. Free, Total and Combined CI, Br, Iodine, pH, Acid Demand, Total Alkalinity, Water Hardness and Cyanuric Acid. Handy red tote box contains complete instructions, solutions and tests. Pro-Design Test Cell features CI range to 10PPM and meets recommended industry standards. Measures 5-1/2-inch length by 13-3/4-inch height by 11-1/2-inch width.

HARDNESS TEST KIT PENTAIR

A great all-rounder. It is designed to determine total hardness (as CaCO3) in drinking and process water, heating and cooling systems, swimming pools and spas. Also suitable to be used in agriculture, food and beverage industries.
This handy Checker is easier to use and more accurate than chemical tests kits. It is dedicated to a single parameter. It has single button operation system and easy to use.

The large LCD is easy to read and the auto shut-off feature assures the battery will not be drained.

It may be small, but it is certainly a big convenience!

Ideal for:

    Drinking water
    Process water
    Heating and cooling systems
    Swimming pools, hot tubs and spas
    Agriculture
    Food and Beverage industries

Water Hardness Guide 		
Hardness classification 	Parts per million (ppm) 	Grains per gallon (gpg)*
Very soft 	<17.1 	<1.0
Soft 	17.1 to 60 	1 to 3.5
Moderately hard 	61 to 120 	3.5 to 7.0
Hard 	120 to 180 	7.0 to 10.5
Very hard 	180 + 	10.5 +
* 1 grain per gallon = 17.1 ppm

HARDNESS TEST KIT HANNA

DIGITAL HARDNESS METER

This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It's an ideal auxiliary instrument of various types of small pure water equipment. 
Displaying Mode: LCD display with backlight, LCD 2x16 bit;

Accuracy: 1.0%(FS);

Current Output Signal: 4-20mA, isolated, transportable;

Refresh rate: 3S;

Accuracy: ±0.03mA@25℃, 24V

Control output signals: Hi/Lo/off (normally open contact)

Pulse Output Signal: Pulse modes (maximum pulse rate: 400p/m), RS485 communication output signal

Power supply: 18-36V DC

Communication output:RS485, BAUD RATE:2400,4800,9600.

CONDUCTIVITY CONTROLLER

PH PROBE FOR PH-803W Wifi Monitoring Digital PH ORP Controller

PH PROB FOR SMART CONTROLLER

PH PEN TYPE

PH-803W application software and application software installation video, only monitoring software is Android system, currently there is no Apple terminal, if necessary, please contact me, provide your email, I will send the software from the application and application software for you to install the video to help you install, link to your phone, and use the product.
PH-803W Internet of Things PH and ORP Controller:
PH-803W is a new wifi digital monitoring acid-base and redox controller that can measure and display pH value and redox value(ORP) at the same time. It has 2 BNC electrodes (pH and redox) and 2 output sockets. It has a fast response speed and easy pH calibration. Both electrodes are detachable and can be easily replaced at any time without the need to purchase and replace the entire device. At the same time, it controls other pH and ORP related equipment to adjust the pH and redox value in the liquid.
Accurately, easily and automatically monitor and control pH and ORP values and other pH and ORP related control equipment. Through strict quality certification and safety standard, it can guarantee reliability, stability, long service life and trouble-free, And it is easy to carry, using the dead zone protection function when using or installing the unit, you can choose to mount it on the wall or hang it in a solution container. The product types are: 110 V and 220 V.

PH ORP SMART CONTROLLER WIFI

pH/ORP-3500 series is a kind of popular and cost-effective online pH and ORP controller , with plug-in pH/ORP-1220 sensor, which have good measurement accuracy, anti-interference,easy to install and operation features.
Characteristics
Ø  White backlight LCD screen,several operations, easy for operation.
Ø  Be compatible for six kinds of buffer solution(10.00,9.18,7.00,6.86,4.00,4.01) which suitable for international standard.
Ø  Selectable temperature sensor which reduce the replacement cost.
Ø  Manual calibration is easy for on-site calibration.
Ø  EMC enhancement type could run smoothly under kinds of industry environment. 
Ø  （4~20）mA output support instrument/transmitter modes and satisfy all （4~20）mA receiving unit.
Ø  Double relay high/low and delay control function could fulfill pH or ORP interval control and adjustment.
Ø  Several power supply to be selection according to the different models.Input AC/DC power, no polarity connection.

PH CONTROLER PANEL MOUNTED

INFINITY introduce pH series intelligent water quality analysis online pH+
controller with high quality pH sensor along with their T type housing for
accurate reading online.
pH series intelligent water quality analysis online pH+ controller having
double relay output facility that helps to make automatic pH correction
dosing system, acid/caustic dosing system, mineral adding system etc.
pH is the measure of the hydrogen ion concentration in a liquid.
pH measure the acidity or alkalinity of a liquid.
The pH scale is logarithmic and runs from 0 -14 with 7 being as a natural.
Less than 7.0 pH indicate acidic solution.
Higher than 7.0 pH indicate alkaline (basic) solution

PH CONTROLER INF

Controller PH ORP Tester
Swimming pool water quality is used to test water quality, PH & ORP. This water monitor is digital one, which is high quality. And pool controller is usually used for public pool or competitive pool. If you want to know more information, feel freely contact me.
Ideal for: 1) Hotels 2) Motels 3) Clubs 4) Condos 5) Apartments 6) Homes

PH AND ORP CONTROLLER COREL

ORP PROBE FOR PH-803W Wifi Monitoring Digital PH ORP Controller

ORP PROB FOR SMART CONTROLLER

ORP PROB

1. Introduction
Industrial PH Meter PHG-1800 is the intelligent upgrade product of industrial pH testing instrument. It could measure and control pH value of wastewater continuously, the pH meter is applicable for municipal wastewater treatment, chemistry, printing and dyeing, paper, medicine, plating and environmental production etc.
In accordance with the environment and characteristics of water industry, as well as the international power supply standard, considering the electricity design in special environment, the pH meter could be supplied with power 220V AC, and safe low voltage 24V AC,24V DC for selection.
 
Main Characteristics:
Chinese and English language display
Measure pH/ORP, high/low limit control, current output, digital communication
It could be set automatic or manual temperature compensation
pH high limit alarm, low limit alarm, double relay, alarm delay could be adjust
Instrument mode isolated transmitting port, max circle resistance bigger than 300Ω
Sound alarm function could be set; 
Backlight of LCD could select power saving mode, timing automatic off
High performance CPU, good electromagnetic compatibility
Password management avoid non-professional person operation

2. Main Technical Index
 
Measure range: pH(0 - 14 pH) ; ORP( -1900 - +1900 mV)
Accuracy: + 0.02 pH; + 1 mV
Resolution: 0.01pH; 1mV
         Stability:≤ 0.02 pH/24hr ; ≤ 3 mV/24hr
pH standard solution: 4.01/6.86/9.18
         Display: 128 * 64 dot matrix LCD
Temperature compensation: 0-100 ºC     manual / automatic(NTC10K) 
Signal output: Isolated 4-20mA signal output ;max circle resistance 300Ω
Alarm output: high and low limit alarm contact each group(3A/250 V AC),normal open contact relay
Power supply: AC 220V±10%  50Hz
Power consumption: ≤3W
Working environment:(1)temperature 0~ 60 ºC  (2)humidity≤85%RH
Outline dimention: 96×96×110mm(high×width×depth)
Hole size: 92×92mm(height×width)

ORP Controller-1800

Water proof
Electrode
Light weight
Small size
Product description: ORP-286 Professional ORP Meter Oxidation Reduction Potential ORP-Meter Industry Redox Analyzer Drinking Water, is high precision pen type orp redox analyzer is a nice waterproof type ORP test pen

O.R.P PEN TYPE

ORP-3500 series is a kind of popular and cost-effective online pH and ORP controller , with plug-in pH/ORP-1220 sensor, which have good measurement accuracy, anti-interference,easy to install and operation features.
Characteristics
Ø  White backlight LCD screen,several operations, easy for operation.
Ø  Be compatible for six kinds of buffer solution(10.00,9.18,7.00,6.86,4.00,4.01) which suitable for international standard.
Ø  Selectable temperature sensor which reduce the replacement cost.
Ø  Manual calibration is easy for on-site calibration.
Ø  EMC enhancement type could run smoothly under kinds of industry environment. 
Ø  （4~20）mA output support instrument/transmitter modes and satisfy all （4~20）mA receiving unit.
Ø  Double relay high/low and delay control function could fulfill pH or ORP interval control and adjustment.
Ø  Several power supply to be selection according to the different models.Input AC/DC power, no polarity connection.
Model selection
 model 	Power supply 	frequency（Hz） 	Current mode 	Sensor selection
pH/ORP-3500 	DC 24V 	------- 	Instrument/transmitter 	pH-1220B plug-in sensor;
ORP-1220B plug-in sensor or other sensors;
TE-1230-14 temperature sensor

O.R.P METER AND CONTROLLER 3520

INFINITY introduce ORP+ series intelligent water quality analysis online ORP+
controller with high quality ORP sensor along with their T type housing for
accurate reading online.
The ORP sensor is normally supplied with ¾” installation fitting with female
threading.
The sensor should be mounted vertically in the line.
The sensor shall be connected in the sampling line only as the sensor body is
not meant for the pressurized line.
The fitting can be connected to the sampling point by flexible tubing.
Chlorine and Ozone are the most common disinfectants used in the water
and waste water treatment industry.
Oxidation-reduction potential (ORP) is the parameter commonly used
tomeasure REDOX reactions and is the only practical method we have to
electronically monitor disinfectant effectiveness.
ORP sensor is the main part of the ORP Meter. It has two electrodes One
reference and one measuring electrode enclosed in glass tubing. This is
dipped into the line of which ORP is to be measured, it senses the ORP and
sends a signal to the meter.
ORP meter controller is the unit that processes the information received from
the sensor and displays Actual ORP in the line. This unit also controls the ORP
by transmitting signals to dosing pumps, hooters, valves etc through inbuilt
relays.

O.R.P CONTROLLER ONLINE INF

Product Description
Performance features
pH/ORP Meter 9600

This instrument is a panel instrument for on-line monitoring of industrial process pH parameter. It has isolated 4-20 mA current and HIGH, LOW etc. It is widely used in different industries like water treatment, environment project and industrial waste water treatment project to monitor pH value.

O.R.P CONTROLLER 9600

Industrial Conductivity Sensor (K=10)

The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the
thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration
conductive surface is resistant to all kinds of liquid except fluoride acid. The temperature compensation components are: NTC2.252K, 2K, 10K, 20K, 30K, ptl00, ptl000, etc. which are specified by the user.

ELECTRODE TDS PROB MODEL 10

Industrial Conductivity Sensor (K=1.0)

The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the
thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration
conductive surface is resistant to all kinds of liquid except fluoride acid. The temperature compensation components are: NTC2.252K, 2K, 10K, 20K, 30K, ptl00, ptl000, etc. which are specified by the user.

ELECTRODE TDS PROB MODEL 1.0

What functions does the portable conductivity meter have?
 1. Conductivity measurement: Accurately measures the electrical conductivity of a solution, indicating the concentration of dissolved ions.
 2. Temperature compensation: Automatically compensates for changes in temperature to ensure accurate conductivity readings.
 3. Waterproof or splash-proof design: Designed to withstand exposure to water and moisture, making them suitable for field use.
 4. Portable and compact: Lightweight and compact design for easy transport and use in various locations.
 5. Battery-powered: Powered by batteries for convenient operation in remote or outdoor environments.
 6. User-friendly interface: Intuitive interface with simple operation buttons or touchscreen functionality for

TDS PORTABLE METER

Overview
TDS-M2 Portable Digital Water Analyzer Purity Tester Pen Hydroponics TDS Meter Electric Waterproof Lab Detection Measuring Tool

Features:

 

Description: Simple to use, insert the probe into the measured water, you can know the quality of water, convenient to use at home.

 

Lock function, manually lock measurements for convenient reading and recording.

 

Fast and accurate readings. Large LCD display makes it easy to read.

 

Handheld pen style makes it conveniently fits in your pocket or bag. Can test purity of the water quality at any time.

 

Made of ABS plastic, durable and lightweight. Waterproof design, lower power procesor.

 

Specifications: 

 

Material: ABS Plastic

Color: White Size(LxW): About 13.8x2.3cm

Measuring Range: 0-9990ppm

Measurement accuracy: ± 2%

Voltage: 3V

Powered by: 2pcs x Cell Battery(Built-in)

TDS PEN TYPE

To understand the approximate conductivity value of the measured water quality, the meter ranges are:
1. 0-20 μS/cm (applicable to the conductivity measurement of secondary reverse osmosis effluent)
2. 0-20/200/2000 μS/cm (applicable to water inlet, conductivity measurement of first and second reverse osmosis effluent water) is
the most commonly used
3. 0-20/200/2000 ppm (applicable to influent water, TDS measurement of primary and secondary reverse osmosis effluent)
4. 0-20mS/cm (20,000 μS/cm) (applicable to the measurement of high conductivity influent water conductivity)
5. 0-200mS/cm (200,000 μS/cm) (suitable for ultra-high conductivity measurement of influent water conductivity)
6. 0--18.25MΩ·cm (applicable to the measurement of resistivity of high-purity water such as EDI or mixed bed)
Power supply
Understand the power supply that can be provided, usually the specifications are AC 220V/110V; DC 24V
Commonly used power supplies are:
AC 220V, DC 24V
Foreign trade customers may use AC 110V
Do you need to output?
1 The instrument is subdivided into:
2 Display only, without any function output Most commonly used
3 with current output
4 with control output
5 has current and control output
With current and control and 485 communication output
External dimensions of the instrument
The instrument has two dimensions:
1 48x96 Most commonly used
2 96x96

TDS PANEL MOUNTED

ITDS Conductivity measurements are used routinely in several industrial and
environmental applications as a fast, inexpensive and reliable way of
measuring ionic Content in a solution.
The measurement of product conductivity is a typical way to monitor and
continuously trend the performance of water purification systems.
we at Infinity, offer you a full range of conductivity and TDS meters.
Specially designed to display online product water TDS / CONDUSCTIVITY of
your systems
METER CONTROLLER SPECIFICATION
Physical Dimensions
Cut Out Size
Enclosure
Mounting
Input Supply
Display
Calibration
temperature
Ranges TDS
Ranges CON
96(W) x 96 (L) x 53 (D) mm.
92(W) x 92 (L) mm.
ABS
Panel
230 V A.C.
4 Digit 7 Segment Display
Using Internal Setting
0-60 ºC
1 to 1000 ppm
1 to 2000 μs/cm
INTELLIGENT
TCS/COND ONLINE CONTROLLER
+
TC
HIGH ACCURACY
ONLINE TDS / COND. DISPLAY
EASY INSTALLATION
EASY PARAMETERS SETUP
EASY TO MONITOR
LESS PIPING WORK
EASY MAINTENANCE

Top Categories

Cooperation