Water Level Switch
This product is designed to guarantee performance and reliability. for over 40 years millions of customers have been relying on RADAR's products to meet their needs.
ST-70AB liquid level control switch is applicable to all kinds of water tanks for maintaining liquid levels. It may be used to control water either inflow or outflow by direct pump control or to control magnetic starter switch.
<
Specifications

    Power: 110/220V, 50/50HZ
    Max.Pump Power By direct Control: 1.0HP
    Connection : 1'' G. 3/4''G
    Mounting: Vertical Installation
    Control Range: 0.2-5.0 Meters
    Temperature Limit; 5~60C

FLOAT-RADAR

Product Description

Float level switch is a simple structure, easy to use level control device, it does not need to provide power,

no complicated circuit, it has a smaller than the general mechanical switch, long life and other advantages 
Material 	Stainless Steel
Point capacity 	50W
Resistive load 	107 times
Switching voltage 	220VAC/200DC
Working temperature 	±10~120ºC
Switching current 	0.5A
Insulation resistance 	>10Ω
Contact impedance 	<100m
Switch material 	SUS304
Working pressure 	<1.0MPA
Installation method 	horizontal type

ELECTRIC FLOAT SS

Description

A float switch is a device used to detect the level of liquid within a tank. The switch may be used with a pump, an indicator, an alarm, or other devices. These Float Switches are used for Water Level, liquid level Controller etc

The Float Level Switch is made of chemical resistant polypropylene. It is durable, low-cost, and specially designed to solve the long range, multi-points level detection in liquid and liquid with pump or granule instances.

The Cable Float Level Switch is with simple structure of using micro switch or proximity switch or reed switch to control the contact and it is user friendly design for level measurement. The switches will send out ON or OFF contact signal output when the floating angle is larger than a certain degree where the state of the iron ball and reed switch will be changed for actuation.

ELECTRIC FLOAT

Industrial Inline Water Resistivity Meter / Conductivity Meter & Controller

    Measurement range: 0.05-18.25MΩ., 0.05-20 μS/cm, Probe's constant: 0.010 C (CON3131-13)
    Complete Set of Resistivty Meter & Probe Sensor (CON3131-13).
    Meter Resolution: 0.01MΩ.
    Display: High illumination, pure white backlight LCD display.
    Power Supply: AC 85-260V X DC 24V (Transformer included), Safe, accurate and low maintenance.
    Control Mode: Double contact relay output (ON/OFF), SPDT relay.
    Transmitting output: (4~20mA).
    CCT-3300E is a new developed conductivity / TDS integration controller.
    No adjustable component inside the instrument, totally programmed automatic calibration, higher reliability.
    Working temperature: 0-50 C.

 

Applications:

    CCT3300E is widely used for monitoring of all ultra-pure water process, Deionised DI water applications, Reverse Osmosis units, Demineralized water plants ... ect.
    Pure / ultrapure water measurement control, widely used for electronic, electric, pharmaceutical, fine chemistry, clinical medicine, life science, chemical industry ....

 
Installation:

    Panel mounted ,fast installation clamp. 
    Dimensions: 48mm×96mm×80mm(H×W×D).
    Slot dimensions: 44mm×92mm(H×W). 
    Weight 0.27kg. 
    Conductivity probe installation: NPT 1/2" Thread.

 
Water Conductivity Resistivity Probe (included):

    Conductivity Probe / Conductivity Sensor / Conductivity Electrode. 
    Material: Stainless steel, Graphite and plastic.
    Model: CON3131-13 / 5m cable, Cell constant: 0.010cm-1 (0.05-18.25MΩ., 0.05-20 μS/cm).
    Installation: NPT 1/2" Thread.
    Other Probes are available, check with us.

RESISTIVITY MONITER PANEL MOUNTED

The Reverse Osmosis Controller (RO Controller) CCT-7320 is a combined control instrument of a reverse osmosis controller and an on-line conductivity meter. The RO controller can perform the operation test, status control and on-line monitoring of water quality conductivity (combining PLC controller and conductivity meter). It takes multiple anti-interference measures, adopts unique process flow and graphical control panel with LED indicator lamp embedded, the interface is friendly; menu-driven operation is used, multiple groups of parameters can be set and modified, the requirements of automatic operation are met.
Process Flow Selections
There are two typical operation modes for RO system (as shown in Fig.1A and B). This instrument can operate in both modes in A and B.
Technical Specifications:
1. Power voltage: AC 220V±15%  50Hz       Power consumption: ≤3W
2. Environment conditions: 1) temperature: 0～50℃;   2) humidity: ≤85%RH
3. Measuring range: 0～20μS /cm，0～200μS /cm，0～2000μS /cm （Fixed range which has been set by the manufacturer and can not be changed by customers: Please indicate which measure range will be needed before placing an order. 200μS /cm or 2000μS /cm ? The ex-factory standard is 0-200μS /cm without prior indication. Except the range, please also let us know you need high pressure flush or low pressure flush program before placing an order）
Note: 0～2000μS /cm is suitable for the equipment with conductivity of the outflow water 100～2000μS /cm,  with conductivity lower than 100μS /cm, measure range 0～200μS /cm or 0～20μS /cm should be selected.                                       Accuracy: 1.5 level
4. Load capacity of output contact: 3A/250V AC (the magnetic valve should be driven through intermediate relay)
5. Operation pressure of conductance cell: 0～0.5Mpa
6.Medium temperature:5～50℃
7.Temperature compensation: automatic temperature with 25℃ as reference temperature
8. Distance of measuring range: less than 30m (the ex-factory configuration of electrode cable is 5m unless there is a special agreement)
9. Display mode: 3 1/2-digit LED digital display
10. Electrode selected: 1.0cm-1
11. outline dimensions: 96×96×110mm (height×width×depth)
   meter board hole: 92×92mm (height×width)

R.O CONTROLER CCT 7320

Capacity

    A9 1-1 : 2HP 1 ф (RWP) | 3HP 1 ф (HPP)
    A9 1-3 : 2HP 1 ф (RWP) | 4HP 3 ф (HPP)
    A9 3-3 : 3HP 3 ф (RWP) | 5HP 3 ф (HPP)
    A9 HD 3-3 (3-7.5) : 3HP 3 ф (RWP) | 7.5HP 3 ф (RWP)
    A9 HD 3-3 (5-10) : 5HP 3 ф (RWP) | 10HP 3 ф (RWP)
    Miscellaneous : 0.5 HP 1 ф SV / DP / UV

NOTE: A9 Series Every models can Customise
with GSM & AUTO MPV Features

Display

    16x2 Alphabetical Blue / White
    Power Input Voltage
    Total Plant Run Hours
    Online TDS & Conductivity
    RWP Pump Ampere
    HPP Pump Ampere

TRIPPING

    Over & Under Ampere Tripping
    Dry Run Tripping
    RWP & HPP Single Phase Tripping
    Low / High Pressure & Level Tripping

PROTECTION

    Over & Under Ampere
    Over & Under Voltage
    RWP/ HPP Dry Run
    Single Phasing
    Reverse Phasing
    Phase Unbalancing
    Low Pressure
    High Pressure
    RAW Tank Low Level
    Treated Tank High Level
    Dosing Tank Low Level

INPUT

    (RWT) Raw Water Tank Floaty
    (TWT) Treated Water Tank Floaty
    (LPS) Low Pressure Switch
    (HPS) High Pressure Switch

OUTPUT

    (RWP) Raw Water Pump
    (HPP) High Pressure Pump
    (FSV) Flushing Solenoid Valve
    (DP) Dosing pump
    Auto MPV

SIZE

    308mm(H) x 308mm(W) x 145mm(D) : Overall Size
    283mm(H) x 283mm(W) : Cutout Size

FEATURES

    Auto & Manual Facility Inbuilt
    Complete RO Logic Pre Program
    Automatic Slow & Fast Flushing Facility Inbuilt
    heavy Duty Terminals for Wiring
    Alphabetical 16x2 Blue / White LCD Display for Batter visualization
    Password Protection Facility for Plant Safety and Security
    Voltage, Ampere, Dry Run, Single Phasing, Pressure & Level Tripping Facilities Inbuilt
    Display Continuously Scrolling with Total Plant Run Hours, TDS, RWP / HPP Pumps Ampere
    Provision for Every Types of Auto MPV & GSM Facilities Optional

R.O CONTROLER A9 INFINITY

RO CONTROLLER A5 1-1
Specification

SUITABLE UP TO 1000 LPH RO SYSTEMS
Online TDS / Cond, AMPERE, VOLTAGE, PLANT HOURS,
AUTO FLUSHING FACILITY, PUMP DRY RUN, PHASE PREVENTION
ALL TYPE OF AUTO MPV SUPPORTED.
AMPERE, VOLTAGE, LEVEL/ PRESSURE PROTECTION.

A5 1-1 Auto :- 2HP(I) RWP/ 3HP(I) HPP
EXTRA:- 0.5 HP(I) DP/ 0.5HP(I) FSV
CUT OUT SIZE:- 215 X 190 mm

R.O CONTROLER A5-1-1

Large LCD Screen & Monitor Flow Rate
Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.


Quantitative control
Controller will turn off the solenoid value automatically when flow reach to the setting value you desire.

 Work with all hall effect flow sensor
It can work various different flow sensor through adjust the K value
TECHNICAL SPECIFICATIONS
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC, Output: 12VDC, max 2A
Adapter lead length: 1m
Measuring Accuracy: ±1%
Output for Solenoid valve: 12VDC, max 2A
Temperature Sensor: 0-100℃/32-212℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
Max Total Volume : 999999 G/L
Quantitative Range: 0-9999 G/L
Flow Rate Range: 0-9999.99/LPM(GPM)
Cable Length : 1m
Dimensions: 88mmx126mmx30mm
Weight: 200g
Operation Environment: Temperature: 0-50℃/32-122℉ Relative Humidity: <85%

For G1" Flow Sensor:
Flow range:1-60L/min
Allow compression:Water pressure 1.75 Mpa below
Sensor:Hall effect
Cable length:15cm
Frequency: F=4.8 * Q (L / Min)

For G1" Solenoid Valve:
G1",thread male outer diameter: 32.5mm
Working pressure:0.02-0.8Mpa
Working Voltage:DC12V

DIGITAL FLOW METER - CONTROLLER

FLOW SWITCH AQUA

The water flow sensor is mainly composed of a plastic valve body, a water flow rotor assembly and a Hall sensor.
It is installed at the water inlet end of the water heater to detect the water flow. When the water passes through the water flow rotor assembly, the magnetic rotor rotates and the speed changes with the flow. The Hall sensor outputs the corresponding pulse signal, which is fed back to the controller. The device judges the size of the water flow and controls it.

Product Paramenters
Product Name
	
Water flow sensor
Rated working voltage
	
DC4.5 5V-24V
Maximum working current 
	
15 mA (DC 5V)
Operating voltage range 
	
DC 5～18 V
Load capacity
	
≤10 mA (DC 5V)
Operating temperature range 
	
≤80℃
Operating humidity range 
	
35%～90%RH (no frost)
Allowable pressure water pressure 
	
below 1.75Mpa
Storage temperature
	
-25～+80℃
Storage humidity 
	
Storage humidity 25%～95%RH

FLOW SENSOR INFINITY

Infinity Flow meter controller has a flow sensor with magnetic
multi-blade spinning rotor(impeller) mounted inside at right angles to the
flow. The rotational speed of the impeller is proportional to the velocity
of the fluid. The pulse generated is transmitted and converted into
volumetric measurement. These controller are calibrated and to give
reliable flow measurement
FEATURE
Easy Size Selection OF Flow Sensor’s
7A / 230V Relay For Every Tripping
Alphabetical 16×2 LCD Display for Easy Monitoring
Two different size OF Flow sensorS can connect & monitor
Display can show Total Volume in liter as well m³
15mm, 20mm, 25mm, 40mm, 50mm different sizes can Support

FLOW CONTROLLER INF

Product description

Liquid reagent Total Hardness I: content 20 ml for determining total hardness for the electronic pool water tester PoolLAB. Professional water analysis for private pools and hot tubs. To determine the total hardness, both reagents are required (I & II).

The total hardness is the sum of calcium and magnesium ions dissolved in the water.

The PoolLAB measures the total hardness in mg/l (ppm) CaCO3 (calcium carbonate). The value can be converted into German hardness (°dH) by multiplying it by the factor 0.056.

The higher the total hardness, the greater the risk of water turbidity and limescale deposits. The higher the pH value in the water, the higher the risk of turbidity and limescale loss.

For the total hardness measurement with the PoolLAB both liquid reagents are always required: Total Hardness I conditions the water sample e.g. Adjust the pH value of the water sample so that the reagent II can react correctly. Total Hardness II is the actual reagent, which causes the colour development necessary for the measurement process.

REFIL FOR HARDNESS POOL LAB 1

Tech Specs

    ENJOY HARDNESS TESTKIT Drop-per-Drop (DPD) style multi-use hardness test
    3 grain-per-gallon resolution on hardness test
    Hach™ pH dip strips
    Hach™ Total iron reagent + dip strips

In the Box

    1 x Hardness Test Kit
    pH Test Strips
    Total Iron Test Strips
    Calipers

HARDNESS TEST KIT ENJOY

Total water hardness test kit comes with total hardness in PPM or grains, test vial, 1/2-ounces No. 6, 1-ounce No. 7 and instructions, compact box. Includes 1 kit per pack. Complete 11 test lab designed for service professionals. Free, Total and Combined CI, Br, Iodine, pH, Acid Demand, Total Alkalinity, Water Hardness and Cyanuric Acid. Handy red tote box contains complete instructions, solutions and tests. Pro-Design Test Cell features CI range to 10PPM and meets recommended industry standards. Measures 5-1/2-inch length by 13-3/4-inch height by 11-1/2-inch width.

HARDNESS TEST KIT PENTAIR

A great all-rounder. It is designed to determine total hardness (as CaCO3) in drinking and process water, heating and cooling systems, swimming pools and spas. Also suitable to be used in agriculture, food and beverage industries.
This handy Checker is easier to use and more accurate than chemical tests kits. It is dedicated to a single parameter. It has single button operation system and easy to use.

The large LCD is easy to read and the auto shut-off feature assures the battery will not be drained.

It may be small, but it is certainly a big convenience!

Ideal for:

    Drinking water
    Process water
    Heating and cooling systems
    Swimming pools, hot tubs and spas
    Agriculture
    Food and Beverage industries

Water Hardness Guide 		
Hardness classification 	Parts per million (ppm) 	Grains per gallon (gpg)*
Very soft 	<17.1 	<1.0
Soft 	17.1 to 60 	1 to 3.5
Moderately hard 	61 to 120 	3.5 to 7.0
Hard 	120 to 180 	7.0 to 10.5
Very hard 	180 + 	10.5 +
* 1 grain per gallon = 17.1 ppm

HARDNESS TEST KIT HANNA

DIGITAL HARDNESS METER

This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It's an ideal auxiliary instrument of various types of small pure water equipment. 
Displaying Mode: LCD display with backlight, LCD 2x16 bit;

Accuracy: 1.0%(FS);

Current Output Signal: 4-20mA, isolated, transportable;

Refresh rate: 3S;

Accuracy: ±0.03mA@25℃, 24V

Control output signals: Hi/Lo/off (normally open contact)

Pulse Output Signal: Pulse modes (maximum pulse rate: 400p/m), RS485 communication output signal

Power supply: 18-36V DC

Communication output:RS485, BAUD RATE:2400,4800,9600.

CONDUCTIVITY CONTROLLER

PH PROBE FOR PH-803W Wifi Monitoring Digital PH ORP Controller

PH PROB FOR SMART CONTROLLER

PH PEN TYPE

PH-803W application software and application software installation video, only monitoring software is Android system, currently there is no Apple terminal, if necessary, please contact me, provide your email, I will send the software from the application and application software for you to install the video to help you install, link to your phone, and use the product.
PH-803W Internet of Things PH and ORP Controller:
PH-803W is a new wifi digital monitoring acid-base and redox controller that can measure and display pH value and redox value(ORP) at the same time. It has 2 BNC electrodes (pH and redox) and 2 output sockets. It has a fast response speed and easy pH calibration. Both electrodes are detachable and can be easily replaced at any time without the need to purchase and replace the entire device. At the same time, it controls other pH and ORP related equipment to adjust the pH and redox value in the liquid.
Accurately, easily and automatically monitor and control pH and ORP values and other pH and ORP related control equipment. Through strict quality certification and safety standard, it can guarantee reliability, stability, long service life and trouble-free, And it is easy to carry, using the dead zone protection function when using or installing the unit, you can choose to mount it on the wall or hang it in a solution container. The product types are: 110 V and 220 V.

PH ORP SMART CONTROLLER WIFI

pH/ORP-3500 series is a kind of popular and cost-effective online pH and ORP controller , with plug-in pH/ORP-1220 sensor, which have good measurement accuracy, anti-interference,easy to install and operation features.
Characteristics
Ø  White backlight LCD screen,several operations, easy for operation.
Ø  Be compatible for six kinds of buffer solution(10.00,9.18,7.00,6.86,4.00,4.01) which suitable for international standard.
Ø  Selectable temperature sensor which reduce the replacement cost.
Ø  Manual calibration is easy for on-site calibration.
Ø  EMC enhancement type could run smoothly under kinds of industry environment. 
Ø  （4~20）mA output support instrument/transmitter modes and satisfy all （4~20）mA receiving unit.
Ø  Double relay high/low and delay control function could fulfill pH or ORP interval control and adjustment.
Ø  Several power supply to be selection according to the different models.Input AC/DC power, no polarity connection.

PH CONTROLER PANEL MOUNTED

INFINITY introduce pH series intelligent water quality analysis online pH+
controller with high quality pH sensor along with their T type housing for
accurate reading online.
pH series intelligent water quality analysis online pH+ controller having
double relay output facility that helps to make automatic pH correction
dosing system, acid/caustic dosing system, mineral adding system etc.
pH is the measure of the hydrogen ion concentration in a liquid.
pH measure the acidity or alkalinity of a liquid.
The pH scale is logarithmic and runs from 0 -14 with 7 being as a natural.
Less than 7.0 pH indicate acidic solution.
Higher than 7.0 pH indicate alkaline (basic) solution

PH CONTROLER INF

Controller PH ORP Tester
Swimming pool water quality is used to test water quality, PH & ORP. This water monitor is digital one, which is high quality. And pool controller is usually used for public pool or competitive pool. If you want to know more information, feel freely contact me.
Ideal for: 1) Hotels 2) Motels 3) Clubs 4) Condos 5) Apartments 6) Homes

PH AND ORP CONTROLLER COREL

ORP PROBE FOR PH-803W Wifi Monitoring Digital PH ORP Controller

ORP PROB FOR SMART CONTROLLER

ORP PROB

1. Introduction
Industrial PH Meter PHG-1800 is the intelligent upgrade product of industrial pH testing instrument. It could measure and control pH value of wastewater continuously, the pH meter is applicable for municipal wastewater treatment, chemistry, printing and dyeing, paper, medicine, plating and environmental production etc.
In accordance with the environment and characteristics of water industry, as well as the international power supply standard, considering the electricity design in special environment, the pH meter could be supplied with power 220V AC, and safe low voltage 24V AC,24V DC for selection.
 
Main Characteristics:
Chinese and English language display
Measure pH/ORP, high/low limit control, current output, digital communication
It could be set automatic or manual temperature compensation
pH high limit alarm, low limit alarm, double relay, alarm delay could be adjust
Instrument mode isolated transmitting port, max circle resistance bigger than 300Ω
Sound alarm function could be set; 
Backlight of LCD could select power saving mode, timing automatic off
High performance CPU, good electromagnetic compatibility
Password management avoid non-professional person operation

2. Main Technical Index
 
Measure range: pH(0 - 14 pH) ; ORP( -1900 - +1900 mV)
Accuracy: + 0.02 pH; + 1 mV
Resolution: 0.01pH; 1mV
         Stability:≤ 0.02 pH/24hr ; ≤ 3 mV/24hr
pH standard solution: 4.01/6.86/9.18
         Display: 128 * 64 dot matrix LCD
Temperature compensation: 0-100 ºC     manual / automatic(NTC10K) 
Signal output: Isolated 4-20mA signal output ;max circle resistance 300Ω
Alarm output: high and low limit alarm contact each group(3A/250 V AC),normal open contact relay
Power supply: AC 220V±10%  50Hz
Power consumption: ≤3W
Working environment:(1)temperature 0~ 60 ºC  (2)humidity≤85%RH
Outline dimention: 96×96×110mm(high×width×depth)
Hole size: 92×92mm(height×width)

ORP Controller-1800

Water proof
Electrode
Light weight
Small size
Product description: ORP-286 Professional ORP Meter Oxidation Reduction Potential ORP-Meter Industry Redox Analyzer Drinking Water, is high precision pen type orp redox analyzer is a nice waterproof type ORP test pen

O.R.P PEN TYPE

ORP-3500 series is a kind of popular and cost-effective online pH and ORP controller , with plug-in pH/ORP-1220 sensor, which have good measurement accuracy, anti-interference,easy to install and operation features.
Characteristics
Ø  White backlight LCD screen,several operations, easy for operation.
Ø  Be compatible for six kinds of buffer solution(10.00,9.18,7.00,6.86,4.00,4.01) which suitable for international standard.
Ø  Selectable temperature sensor which reduce the replacement cost.
Ø  Manual calibration is easy for on-site calibration.
Ø  EMC enhancement type could run smoothly under kinds of industry environment. 
Ø  （4~20）mA output support instrument/transmitter modes and satisfy all （4~20）mA receiving unit.
Ø  Double relay high/low and delay control function could fulfill pH or ORP interval control and adjustment.
Ø  Several power supply to be selection according to the different models.Input AC/DC power, no polarity connection.
Model selection
 model 	Power supply 	frequency（Hz） 	Current mode 	Sensor selection
pH/ORP-3500 	DC 24V 	------- 	Instrument/transmitter 	pH-1220B plug-in sensor;
ORP-1220B plug-in sensor or other sensors;
TE-1230-14 temperature sensor

PH/ORP METER AND CONTROLLER 3520 with sensor

INFINITY introduce ORP+ series intelligent water quality analysis online ORP+
controller with high quality ORP sensor along with their T type housing for
accurate reading online.
The ORP sensor is normally supplied with ¾” installation fitting with female
threading.
The sensor should be mounted vertically in the line.
The sensor shall be connected in the sampling line only as the sensor body is
not meant for the pressurized line.
The fitting can be connected to the sampling point by flexible tubing.
Chlorine and Ozone are the most common disinfectants used in the water
and waste water treatment industry.
Oxidation-reduction potential (ORP) is the parameter commonly used
tomeasure REDOX reactions and is the only practical method we have to
electronically monitor disinfectant effectiveness.
ORP sensor is the main part of the ORP Meter. It has two electrodes One
reference and one measuring electrode enclosed in glass tubing. This is
dipped into the line of which ORP is to be measured, it senses the ORP and
sends a signal to the meter.
ORP meter controller is the unit that processes the information received from
the sensor and displays Actual ORP in the line. This unit also controls the ORP
by transmitting signals to dosing pumps, hooters, valves etc through inbuilt
relays.

O.R.P CONTROLLER ONLINE INF

Product Description
Performance features
pH/ORP Meter 9600

This instrument is a panel instrument for on-line monitoring of industrial process pH parameter. It has isolated 4-20 mA current and HIGH, LOW etc. It is widely used in different industries like water treatment, environment project and industrial waste water treatment project to monitor pH value.

O.R.P CONTROLLER 9600

Industrial Conductivity Sensor (K=10)

The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the
thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration
conductive surface is resistant to all kinds of liquid except fluoride acid. The temperature compensation components are: NTC2.252K, 2K, 10K, 20K, 30K, ptl00, ptl000, etc. which are specified by the user.

ELECTRODE TDS PROB MODEL 10

Industrial Conductivity Sensor (K=1.0)

The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc. It is especially suitable for conductivity measurement in the
thermal power plant and the water treatment industry. It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. Its anti-infiltration
conductive surface is resistant to all kinds of liquid except fluoride acid. The temperature compensation components are: NTC2.252K, 2K, 10K, 20K, 30K, ptl00, ptl000, etc. which are specified by the user.

ELECTRODE TDS PROB MODEL 1.0

What functions does the portable conductivity meter have?
 1. Conductivity measurement: Accurately measures the electrical conductivity of a solution, indicating the concentration of dissolved ions.
 2. Temperature compensation: Automatically compensates for changes in temperature to ensure accurate conductivity readings.
 3. Waterproof or splash-proof design: Designed to withstand exposure to water and moisture, making them suitable for field use.
 4. Portable and compact: Lightweight and compact design for easy transport and use in various locations.
 5. Battery-powered: Powered by batteries for convenient operation in remote or outdoor environments.
 6. User-friendly interface: Intuitive interface with simple operation buttons or touchscreen functionality for

TDS PORTABLE METER

Overview
TDS-M2 Portable Digital Water Analyzer Purity Tester Pen Hydroponics TDS Meter Electric Waterproof Lab Detection Measuring Tool

Features:

 

Description: Simple to use, insert the probe into the measured water, you can know the quality of water, convenient to use at home.

 

Lock function, manually lock measurements for convenient reading and recording.

 

Fast and accurate readings. Large LCD display makes it easy to read.

 

Handheld pen style makes it conveniently fits in your pocket or bag. Can test purity of the water quality at any time.

 

Made of ABS plastic, durable and lightweight. Waterproof design, lower power procesor.

 

Specifications: 

 

Material: ABS Plastic

Color: White Size(LxW): About 13.8x2.3cm

Measuring Range: 0-9990ppm

Measurement accuracy: ± 2%

Voltage: 3V

Powered by: 2pcs x Cell Battery(Built-in)

TDS PEN TYPE

To understand the approximate conductivity value of the measured water quality, the meter ranges are:
1. 0-20 μS/cm (applicable to the conductivity measurement of secondary reverse osmosis effluent)
2. 0-20/200/2000 μS/cm (applicable to water inlet, conductivity measurement of first and second reverse osmosis effluent water) is
the most commonly used
3. 0-20/200/2000 ppm (applicable to influent water, TDS measurement of primary and secondary reverse osmosis effluent)
4. 0-20mS/cm (20,000 μS/cm) (applicable to the measurement of high conductivity influent water conductivity)
5. 0-200mS/cm (200,000 μS/cm) (suitable for ultra-high conductivity measurement of influent water conductivity)
6. 0--18.25MΩ·cm (applicable to the measurement of resistivity of high-purity water such as EDI or mixed bed)
Power supply
Understand the power supply that can be provided, usually the specifications are AC 220V/110V; DC 24V
Commonly used power supplies are:
AC 220V, DC 24V
Foreign trade customers may use AC 110V
Do you need to output?
1 The instrument is subdivided into:
2 Display only, without any function output Most commonly used
3 with current output
4 with control output
5 has current and control output
With current and control and 485 communication output
External dimensions of the instrument
The instrument has two dimensions:
1 48x96 Most commonly used
2 96x96

TDS PANEL MOUNTED

ITDS Conductivity measurements are used routinely in several industrial and
environmental applications as a fast, inexpensive and reliable way of
measuring ionic Content in a solution.
The measurement of product conductivity is a typical way to monitor and
continuously trend the performance of water purification systems.
we at Infinity, offer you a full range of conductivity and TDS meters.
Specially designed to display online product water TDS / CONDUSCTIVITY of
your systems
METER CONTROLLER SPECIFICATION
Physical Dimensions
Cut Out Size
Enclosure
Mounting
Input Supply
Display
Calibration
temperature
Ranges TDS
Ranges CON
96(W) x 96 (L) x 53 (D) mm.
92(W) x 92 (L) mm.
ABS
Panel
230 V A.C.
4 Digit 7 Segment Display
Using Internal Setting
0-60 ºC
1 to 1000 ppm
1 to 2000 μs/cm
INTELLIGENT
TCS/COND ONLINE CONTROLLER
+
TC
HIGH ACCURACY
ONLINE TDS / COND. DISPLAY
EASY INSTALLATION
EASY PARAMETERS SETUP
EASY TO MONITOR
LESS PIPING WORK
EASY MAINTENANCE

TDS CONTROLLER ONLINE INF

Range:
PH: 0.00-14.00pH
ORP: -2000mv-+2000mv(BT789)
EC: 0~19900us/cm; 0~199.0ms/cm
TDS: 0~19900ppm; 0~199.0ppt
SALT 0-199.0ppt;0%-20%
S.G 0.990-1.400
Temp 0℃~50℃(32℉-122℉)

Resolution:
PH: 0.01PH
ORP: 1mv(BT789)
EC:1us/cm(<1999us/cm);10us/cm(>1999 us/cm);0.1mS/cm
TDS: 1ppm(<1999ppm); 10ppm(>1999ppm); 0.1ppt
SALT: 1ppm(<1999ppm); 10ppm(>1999ppm);0.1ppt; 0.01%
S.G: 0.001
Temp: 0.1℃(0.2℉)

Accuracy: 
PH±0.03ph ,
ORP:±5mv(BT789) ,
EC,TDS,SALT: ±2%F.S ,
Temp:±1.0℃

7IN1 TDS MULTIMETER BLUETOOTH PEN TYPE

1.Health begins with water quality, this portable water quality test pen is a handy assistant for your home water quality testing.Whether it's drinking water or bath water, you can check the quality of it with this test pen to better maintain your health.

2. With color screen display function, it can show the test results clearly and let you know at a glance. It also has a USB charging function, making it convenient for you to charge it anytime and anywhere.

3.This test pen integrates five test modes, including TDS, SALT, EC, PH and temperature, which can comprehensively test water quality and meet your needs in different aspects. Whether you want to test drinking water quality or swimming pool water quality, you can easily handle it.

4.Lightweight and easy-to-carry design allows you to carry this test pen anywhere and anytime to test water quality. Whether you are at home or outside, you can easily test the water quality to protect your health.

5IN1 TDS MULTIMETER PEN TYPE RECHARGABLE

Salinity Range: 0~9999ppm/10~200ppt or 0.0-25%, salinity tester has an automatic temperature compensation function(32°F~140°F), which can decrease the error caused by the change of liquid temperature.
Wide applications: There are various purposes for the salinity tester. This instrument can not only detect the salt content of edible salt, salt water pool and koi fish pond, but also the salinity of seawater, marine, salt water fish tank salt level testing.
Backlit design: There is no need to worry about seeing the displayed value if the light is insufficient. salinity meter features a green backlit LCD to help you see the measurement results clearly in any situation.

Features

    Multifunctional, can measure pH, TDS,EC, and salinity values. The measurement range is large and wide, which can measure both fresh water salinity and sea salt
    low power consumption,Automatic shutdown,The instrument will shut down automatically for 5 minutes without any operation
    3,Automatic temperature compensation function With backlight function, it can be tested at night
    Small size, light weight, easy to carry, can be put into a pocket
    The waterproof grade is IP
    at normal temperature and pressure, when the shell is temporarily immersed in 1M water will not cause harmful effects

5IN1 TDS MULTIMETER PEN TYPE 0-19900

Snooker

900kg/24H High Production Capacity: The Snooker SK-2000P ice maker is designed to produce an impressive 900 kg of ice per day, making it a suitable choice for high-demand applications, such as restaurants, hotels, and food shops.
Automatic Commercial Ice Maker: Equipped with an automatic system, the SK-2000P makes it easy for users to manage ice production, ensuring efficient operation and energy savings.
Wide Industry Applications: This ice maker is suitable for various industries, including garment shops, building material shops, manufacturing plants, and machinery repair shops, offering flexibility and adaptability in different business settings.
Reliable and Durable Components: The SK-2000P is built with high-quality components, such as the Hitachi compressor, gearbox, compressor, motor, pressure vessel, and pump, ensuring the machine's durability and performance over time.
Comprehensive Warranty and Testing: The manufacturer provides a 3-year warranty on the machine and includes a machinery test report for added peace of mind. This ice maker is a reliable and efficient choice for commercial, home, and industrial applications, offering both automatic ice production and versatile industry usage.

ICE MAKER 909KG 4000T

High Productivity: The Snooker SK-120P 55kg/24h Business Use Ice Maker is designed to produce up to 55kg of ice per day, making it an efficient choice for commercial and industrial applications.
Durable Components: The machine is built with high-quality core components such as motor, pressure vessel, pump, gear, gearbox, PLC, engine, and bearing, ensuring long-lasting and dependable performance.
Versatile Ice Shapes & Storage: The machine produces ice cubes or ice blocks, and has a storage capacity of 18kg, making it suitable for a wide range of applications in various industries including cafes, shops, farms, and restaurants.
Competitive Pricing: The Snooker SK-120P offers a competitive price point, making it an attractive option for businesses looking to invest in an ice-making machine without breaking the bank.
Comprehensive Warranty & Certification: The product comes with a 3-year warranty and is accompanied by a machinery test report, providing buyers with peace of mind and ensuring they are purchasing a reliable and high-quality product.

ICE MAKER 55KG 460M

Robust and Efficient Production: The Snooker SK-280P commercial ice maker boasts a powerful 127kg daily production capacity with an impressive 24-hour continuous ice-making capability. It is designed for industrial, home, and commercial applications, making it suitable for various industries including advertising companies, restaurants, retail, hotels, and food shops.
Versatile Ice Shapes and Customization: The machine produces a range of ice shapes, including ice blocks, cubes, and cube ice, catering to different customer needs. Additionally, the adjustable ice thickness settings allow for customization, ensuring the perfect portion control and serving.
Comprehensive After-sales Service: The Snooker SK-280P comes with a 3-year warranty and free spare parts, demonstrating the manufacturer's commitment to quality and customer satisfaction. The after-sales service includes video technical support, ensuring any issues are resolved swiftly and efficiently.
Environmentally Friendly and Energy Efficient: Equipped with a R290 refrigerant, the ice maker operates on a 220V voltage and is certified with ROHS and CE standards. Its energy-efficient design not only reduces energy consumption but also contributes to a greener environment.
User-friendly and Reliable: The Snooker SK-280P is designed for easy operation, with a user-friendly interface and clear instruction manual. Its core components, including a motor and pressure vessel, are made of high-quality stainless steel, ensuring durability and reliability.

ICE MAKER 127KG 730M

FILLING MACHINE

The 5 gallon bottle washing machine is an indispensable equipment in the empty barrel pretreatment process of the drinking water production line, In order to adapt to the needs of most mineral water plants and pure water plants, the cumbersome empty barrel processing technology has become simple automation. Our company introduces and absorbs the advanced technology of brushing barrels at home and abroad. The device integrates the bottle cap and cleans the inside and outside of the barrel, and has reliable performance, simple operation and convenient maintenance.

WASHING MACHINE WITHOUT CAP REMOVER

The 5 gallon washing machine integrates pull-out and brush barrel. It is suitable for pull-out and brush barrel of 3 gallon&5 gallon barrel water. In view of the needs of mineral water&purified water manufacturers, the empty barrel is treated automatically.

The 5 gallon washing machine integrates pull-out and brush barrel. It is suitable for pull-out and brush barrel of 3 gallon&5 gallon barrel water. In view of the needs of mineral water&purified water manufacturers, the empty barrel is treated automatically.
The semi-automatic lid-pulling and barrel-brushing machine consists of two parts. The left half is used to pull out the lid of the five-gallon barrel, and the right half is used to wash the inside and outside of the barrel. The whole machine is made of 304 stainless steel, with excellent equipment and quality. It is specially equipped for barreled water production line with medium and lower output.

 

It is the supporting production equipment of 3 or 5 gallon barreled drinking water production line. Especially suitable for automatic removal and brushing of recovery barrel before cleaning, which can reduce production costs for users, significantly improve labor efficiency, reduce secondary pollution of manual removal to a greater extent, and reduce the labor intensity of workers. The whole body is made of high quality stainless steel, which is corrosion resistant and easy to clean.

WASHING MACHINE

ULTRA FILTRATION MEMBRANE 8 ''

ULTRA FILTRATION MEMBRANE 4 ''

ULTRA FILTRATION SYSTEM 3000 l/h

ULTRA FILTRATION SYSTEM 1000 l/h

Reverse Osmosis Water Filter: Experience what water should taste like with the Express Water reverse osmosis water filtration system reducing up to 99.99% of Lead, Chlorine, Fluoride, Nitrates, Calcium, Arsenic, and more.
Water Purification System: Drink the healthiest water on Earth. All our water filters are specially engineered to work together, producing the safest and best tasting water you’ll ever drink
Under Sink Water Filter: Don’t waste money on professional installation. Express Water’s quick and easy-to-understand design means you can install and understand everything about your new water filtration system
Under Sink Water Filter System: No need to mess with refilling or activating your water filter, Express Water’s water filtration systems automatically fill your water tank with high quality drinking water
Leak Detection: Each under sink water filter includes an emergency leak stop detector that shuts off water flow when it detects unwelcomed moisture
Customizable RO Water Filter System: Express Water home water filtration systems are fully upgradable and customizable with quick connecting fittings. Try additional filtration attachments including UV Water Filter, Alkaline Water Filter, Deionization Water Filter, and more

Top Categories

Cooperation