Runxin

F64A Manual Multiport Softener Control Valves

The F64A manual multiport softener control valve operates with a flow rate of 4m³/h. It carries out the functions of service, backwash, brine and slow rinse, brine refill, and fast rinse. The functions can be switched by rotating the handwheel.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    No water pass the valve of single tank type in regeneration.

    Various methods for installation

    The valve can be top-mounted and side-mounted (Should be used with the side-mounted connector).

    Handle alternatives: Metal and plastic

Model:F64A1/A2（61104/ 61204）

Handle material:Metal/plastic

Mount type:Top mount

Inlet/outle:1"F

Drain:1/2"M

Brine line connector:3/8"M

Mounting base:2.5"-8NPSM

Riser pipe:1.05"OD

Flow rate:4m³/h

Filter tank:6"--18"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜5FTU

Application:Ion exchange equipment, water softener for boiler system,RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 6M3/Hr 1"  

Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It has two valve cores. One controls inlet water, the other controls outlet water.

    No water pass the valve in regeneration in single tank type.

    Brine refill controlled by manual ball valve. （F77AS/61215，F77CS/91215）

    During service, manual ball valve will control to start the brine refill, in order to shorten the regeneration cycle time.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted.

    F77CS can be installed in top mounted or side mounted. (When side-mounted connector TOP side connected with top strainer, BOTTOM side connected with side bottom strainer) It’s up-flow for regeneration. If connector with side-mounted in upside down (TOP side connector with bottom strainer, BOTTOM side connected with top strainer) It’s for floating bed system.

    For filtration system

Drain outlet is the same size as water outlet. Block the brine line connector change the valve to F77BS filter valve.
Model:51215(F77BS)

Inlet/outlet:2"M

Drain:2"M

Base:4"-8UN

Riser pipe:1. 5" D-GB

Water treatment capacity:15 m³/h

Tank diameter range:10"~30"

Water pressure:0.2MPa～0.6MPa

Water temperature:5℃～50℃

Water turbidity:＜20FTU

Environment temperature:5℃～50℃

Relative umidity:≤95％(25℃)

RUNXIN MANUAL FILTER VALVE 15M3/Hr 1.5"

N56D Manual Multiport Filter Valve

The N56D manual multiport filter valve provides a flow rate of 10m³/h and adopts a corrosion resistant gasket for opening and closing. It can be applied as a service, backwash, or fast rinse valve. It can also work under pressure. With a rotating handwheel, you can easily switch the settings without turning off the pump. The filter can be used in residential filtration systems, swimming pool filtrating and RO pretreatment filtration systems.
Model:N56D1/D2（51110/ 51210）

Handle material:Metal/plastic

Mount type:Top mount / side mount

Inlet/outlet:2"F

Drain:2"F

Mounting base:4"-8UN

Riser pipe:1.5"D-GB

Flow rate: 10m³/h

Filter tank: 10"--24"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:＜20FTU

Application:Manganese and iron removal

Filter media:Quartz sand, activated carbon, manganese sand

RUNXIN MANUAL FILTER VALVE 10M3/Hr 1.5"

F56A Manual Multiport Filter Valve

The F56A manual multiport filter valve features a flow rate of 4m³/h and utilizes a corrosion resistant gasket for opening and closing functions. It can be used as a service, backwash, and fast rinse valve, even under pressure. With a handle, you can switch the settings easily without turning off the pump or the power. When selecting a valve setting, make sure to always depress the handle before turning.
Model: F56A1/A2（51104/51204）

Handle material: Metal/plastic

Mount type: Top mount

Inlet/outlet: 1"F

Drain: 1"F

Mounting base: 2.5"-8NPSM

Riser pipe: 1.05"OD

Flow rate: 4m³/h

Filter tank: 6"--12"

Water pressure: 0.15-0.6Mpa

Water temperature: 5-50℃

Water turbidity: ＜20FTU

Application: Activated carbon filter, sand filter
Filter media: Quartz sand, activated carbon

RUNXIN MANUAL FILTER VALVE 4M3/Hr 3/4"

Model: 51106(F56F)

Inlet/outlet: 1" F

Drain: 1" F

Base:2.5"-8NPSM

Riser pipe: 1" D-GB

Water treatment capacity: 6 m³/h

Tank diameter range: 6"`~14"

Water pressure: 0.15MPa～0.6MPa

Water temperature: 5℃～50℃

Water turbidity: ＜20FTU

Environment temperature: 5℃～50℃

Relative Humidity: ≤95％(25℃)

RUNXIN MANUAL FILTER VALVE 6M3/Hr 1"

Needle Valves is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, They are also usually used in flow-metering applications, especially when a constant, calibrated, flow rate must be maintained for a certain duration, such as the idle fuel flow in a carburetor, steam in the pipe from the power plant, as well as to provide shut off for the pressure gauge or on applicators in many industries.
1. Needle Valve Features& Applications:

    Accurate& Precise control flow rate and pressure.
    Provide reliable cutoff.
    Precise adjustment of flow, bearing resistance, and pressure regulation.
    It also can be used in pump start, turbine by-pass, flow discharge, air regulation, and Reservoir inlet.
    Small Size.
3. Needle Valve General Data:

    Pressure Range: 5000Psi-15000Psi(344Bar-10343Bar)
    Working temperatures: -54°C-649°C (-65°F-1200°F)
    Size:1/8''-1''(NPT), DN6-DN20, 
    Connection: Dual Ferrules, Flange, Thread, Welding.
    Application: Liquid or Gas, Steam, Water
    Body Material:316

NEEDLE VALVE SS 316

Needle Valves 
is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, They are also usually used in flow-metering applications, especially when a constant, calibrated, flow rate must be maintained for a certain duration, such as the idle fuel flow in a carburetor, steam in the pipe from the power plant, as well as to provide shut off for the pressure gauge or on applicators in many industries.
1. Needle Valve Features& Applications:

    Accurate& Precise control flow rate and pressure.
    Provide reliable cutoff.
    Precise adjustment of flow, bearing resistance, and pressure regulation.
    It also can be used in pump start, turbine by-pass, flow discharge, air regulation, and Reservoir inlet.
    Small Size.
3. Needle Valve General Data:

    Pressure Range: 5000Psi-15000Psi(344Bar-10343Bar)
    Working temperatures: -54°C-649°C (-65°F-1200°F)
    Size:1/8''-1''(NPT), DN6-DN20, 
    Connection: Dual Ferrules, Flange, Thread, Welding.
    Application: Liquid or Gas, Steam, Water
    Body Material:304

NEEDLE VALVE SS 304

FLOW METER  PANEL

1.Working Pressure:≤1MPa

2.Operating Temperature:0~65 centigrade

3.Accuracy:±4%

4.Body Material:Acrylic

5.Fitting Material:ABS or SS

6.Float Material:SS 
7.O-ring Material:Silicon rubber

8.Customized specifications are available

FLOW METER  ONLINE

PRESSURE GAUGE ONLINE 60 BAR BIG 4 ''

PRESSURE GAUGE PANEL 

PRESSURE GAUGE ONLINE 

Application: General
Temperature of Media: -20~180°C
Power: Manual
Media: Water Oil Gas
Structure: stop valve
Connection: Female Thread
Body material:stainless steel

GLOBE VALVE  SS 

Application:General
Power:Manual
Structure:BALL
Port Size:Threaded
Temperature of Media:Normal Temperature
Media:Water
Material:Stainless Steel
Size:1/4'' ~4''(DN6~100mm)
Pressure:1000PSI

BALL VALVE  SS

Application:General
Power:Pneumatic,Solenoid
Type:Water Heater Service Valves, Atmospheric Vacuum Breaker, Thermostatic Air-Vent & Vacuum Breaker, Temperature & Pressure Relief Valves, Pressure Reducing Control Valves
Structure:Pilot, Control
Port Size:1/4" ~2"
Temperature of Media:Medium Temperature
Media:Base
Material:Brass
Pressure:Medium
Max.Working pressure
7Mpa
Max.Working Temperature:0~130℃Type:Water Pressure Reducing Valves, Pressure Regulators, Air & Vacuum Release Valves, Temperature Regulating Valves, SOLENOID VALVES, ACCESS VALVES, Water Regulating Valves, Air Valves & Vents

SOLENOID VALVE NORMALLY CLOSED

SOLENOID VALVE  NORMALLY OPEN

MOTORIZED BALL VALVE 63 HP

Description of Motorized Water Valve

Our motorized ball valve consists of on/off type or 3-point type actuator… series ball valve,which have compact structure,stable operation,excellent capacity of water stoppage, large water flow rate, zero dirt block and low torque. Winner motorized ball valves are widely used in HVAC system, heating system, water treatment system and some industrial equipment.


Application of Motorized Water Valve
HVAC system, heating system, Water treatment system, Industrial equipment
Operational mode of Motorized Water Valve
motorized ball valve is motor-operated by a type of WRA-63…, and WRA-63…A actuator. The actuator is controlled by a modulating on/off or 3-point control system and move the ball of the valve, to the opening position dictated by the control signal.


Technical data Valve body:
Medium: cold/hot water, with 50% glycol         
Temperature of medium: 2°C...90°C
Rated pressure: PN20                             
Pipe connector: internal thread                              
Ambient temp. range: −5…+60°C;0…90%RH

MOTORIZED THREE WAY VALVE 1''

SAUNA CONTROL BOX

SAUNA WOODEN CLOCK

SAUNA STONE X 20 KG

SAUNA WOODEN HYGROMETER

SAUNA DOOR

SAUNA CONTROLLER 7" TOUCH SCREEN 

SAUNA CONTROLLER OCB MODEL

SAUNA CONTROLLER OCA MODEL

SAUNA RESISTANCE 3KW

SAUNA LAMP

SAUNA BUCKET AND LADLE STAINLES

SAUNA BUCKET AND LADLE

SAND TIMER H2

SAND TIMER

0O(CS-B stand sauna heater

0CS-B is stand type commercial sauna heater , the power is from Skw to 20.1kw. 5V control panel and high
voltage control box is separately, itis smart and safety;

1. Large and improved time display screen showing time in hours and minutes , display Centigrade or
Fahrenheit according to the customer's preference

2. Customer can preset the working time and the waiting time , double mode

3. Sequential heating system to save energy and prolong the main parts' life

4. Diagnostics - 8 LEDs on the controller show different working stages and operations for elementary
diagnosis if a problem should occur.

5. Extra switch for sauna room lamp

6. High temperature cut-off for both sauna room and sauna heater. Double safety protection

7. Stainless steel shell

8 comply with new CE stand with interlock function

9 linking function and one control panel can control many sauna heaters working together as one sauna
heater

SAUNA HEATER  OCSB CONTROLLER OCEANIC 

Oceanic OCS-B series standby sauna heaters are available from 9kw to 20.1 kw and are
equipped as standard with our OCS-B controller or OSX touch screen control panel.
Standard OCS-B series sauna heater with stainless steel 304 housing and 6 to 9 pcs
heat elements ,usually it is for commercial user.

Oceanic sauna heater have passed the real CE safety test in UK by Nemko and Rohs
test in Germany by Hermes.

Every Oceanic sauna heater is subjected to 5 strictly controlled tests:

A. 48 hour continual test for circuit board

B. Controller is tested for all functions

C. High voltage test

D. Earthing resistance test

E. Operational test of every sauna heater before packing

SAUNA HEATER  OCSA CONTROLLER OCEANIC 380V

OCS-I build in control sauna heater
Oceanic OCS- built in control sauna heaters are available from 3kw to 9kw,mainly for domestic user.
Oceanic built in control sauna heater with external temp sensor ,so the temperature control for sauna room
is very accurate

Oceanic built in sauna heater controlled by circuit board, it is much more reliable

Digital display temperature and time

Customer can preset the working time and the waiting time, double mode

Sequential heating system to save energy and prolong the main parts'life

Diagnostics - 6 LEDs on the controller show different working stages and operations for elementary
diagnosis if a problem should occur.

Extra switch for power supply control

High temperature cut-off for both sauna room and sauna heater. Double safety protection

Stainless steel shell is optional

Every Oceanic sauna heater is subjected to 5 strictly controlled tests:

1. 48 hour continual test for circuit board

2. Controller is tested for all functions

3. High voltage test

4. Earthing resistance test

SAUNA HEATER BUILT IN OCEANIC 380V

1. Temperature setting 50-110℃ or 122-230℉;  
 
2. Sequential heating to save energy and prolong the working life of the elements;

3. Door interlock  (new EU standard  for ensuring safety).
 If the sauna cabin door is opened, the timing will stop and the sauna
heater will not restart again until it is reset;

4.  Control panel + control box, high voltage and low voltage are separately;

5.  Three control panels options for different application requirements.

SAUNA ESSANCE OIL

FRAGRENCE PUMP SINGLE

Round resistance heaters for steam generator

 

Round it to replace a worn or defective resistance.

(check the shape of your resistance on your steam generator)

Choose the right model in the options!

 

4kw resistance is actually a strength of 4.5kW

measure:

24 x 5 cm (length x width) 

13 cm of perimeter

STEAM RESISTANCE

High quality steam bath door made of 8mm toughened safety glass.

Lux series steam doors are equipped with Premium type high quality hinges, Premium 400 mm metallic handle and magnetic lock system.

Door frames are made of anodised aluminium that is resistant to hight levels of humidity and water, which ensures long term usage.

STEAM DOOR

Oceanic

OSX intelligent touch screen control
panel

0sX intelligent touch screen control panel can control sauna heater , steam generator Infrared sauna and
saunarium (sauna heater+steam generator combination) the OSX features are as following

1, 7 inch capacitor touch screen high sensitive and high resolution ratio

2. Friendly operation interface very easy for operation

3.10 different languages operation interface English, French , Arabic Russian , Spanish Portuguese
\Vietnamese ,German ltalian Turkish .....plus the languages you want

4.30000 hours life

5.0SX is intelligent , It will control what it connected sauna heater , steam generator Infrared sauna and
saunarium (sauna heater+steam generator combination)

6. It has the locking function with passwords to prevent from user operating randomly

7. Calendar and clock function for automatic on/off and descaling regularly

STEAM CONTROLLER 7" TOUCH SCREEN

OC-C digital controller
0C-C digital controller

Dimension(L*W*H) : 152*115*20mm

+ Working Voltage(DC5V)

- LCD display

- Auto Diagnostics LED display

- Temperature display

- Time display

« Calendar and clock function for on/off and auto descaling
- Centigrade or Fahrenheit display

« Auto drain and flush

- Auto descaling

* Hand drain and flush

- Temperature control

« Time control

- Light control

- Sequential heating

+ Steam on demand function

- Fast steaming and no pause even filling cold water

STEAM CONTROLLER LCD

The Oceanic OCSB controller keypad controls the time, temperature, lighting and fan. It can be mounted up to 10m from the main control box, typically on the front of the cabin.

This keypad can only be used with an Oceanic sauna heater.OCSB Controller Keypad for Oceanic Sauna Heaters:

    Time
    Temperature
    Lighting
    Fan 
    12 hour timer
    Oceanic Sauna Heaters only

STEAM CONTROLLER OCB

Temperature Sensor for OCA and OCB Steam Generators

STEAM HEAT SENSOR

Automatic Drain Valve for Steam Generator

The automatic drain valve is designed to ensure efficient cleaning of the steam generator. It activates at set time intervals and automatically when the steam generator is turned off. The main function of this valve is to remove accumulated lime deposits inside the steam generator. Regular and complete removal of lime deposits significantly extends the equipment's lifespan, ensuring its uninterrupted operation and increasing energy efficiency.

Features:

    Automatic activation: Works at set intervals and when the steam generator is turned off.
    Effective cleaning: Allows complete removal of lime deposits, preventing their accumulation.
    Extended lifespan: Regular removal of deposits prevents damage and extends the lifespan of the steam generator.
    Ease of use: Easy to install and operate without the need for constant monitoring.

Advantages:

    Reduced maintenance costs: Less need for manual cleaning and equipment repair.
    Increased performance: Supports optimal operation of the steam generator by preventing lime build-up.
    Time-saving: Automated cleaning process frees up time for other important tasks.

The automatic drain valve is an indispensable element for any steam generator, ensuring its reliable and efficient operation for many years.

STEAM GENERATOR DRAIN VALVE

OC-B Series Oceanic steam generator

OC-B Series Oceanic steam generator is our second steam generator mainly face to commercial user , we
collected advices and feedbacks from different customers......, some with high water pressure some with
hard water...

except for carry forward all OC-A Series ‘s advanced feature and function , B Series unique auto-de-scaling
function help the user to de-scale the scale on heat element and boiler, This reduce the water quality ‘s

damage to heat element and let the maintenance to be so easy,

New commercial operation mode can produce steam much fast (in few seconds) as special design and
programme

Special boiler frame design let the steam generator produce steam without stopping even during filling cold
water

Better copper water inlet valve and big drain valve as well as lime-scale outlet
Clock function to turn on /off steam generator and regular descaling setting
DCS5V controller OC-B button control panel ,OCC LCD controller or OSX touch screen control panel

For more information about OC-B auto-descaling steam generator please fell free to contact us

STEAM GENERATOR 12KW WITH 7" TOUCH SCREEN OCEANIC 

STEAM GENERATOR WITH LCD CONTROL OCEANIC

STEAM GENERATOR  OCEANIC

Brief introduction:
 
1. steam generator with different power, 4kw to 15kw,with 220/380v.
 
2. Be used for steam shower room, wet sauna room.
 
3.With AC adapter, Water level sensor, Safety relief valve and etc. 
 
4.Material:aluminum-zinc and stainless steel, etc.
 
5. suitable for families and small sauna club.
 
 
 Equipped with TC-135A control panel.
 
You could set temperature to the range of 35-55 C(95-131 F), and working time to 1~60 minutes or "CH" non-stop mode. To eliminate mineral building up, please manually drain the steam generator frequently.
 
The Economic steam generator features auto water feeding system, over-pressure protection and etc. A perfect choice for residential bath room or small business.

Top Categories

Cooperation