Runxin

F77AS Manual Multiport Softener Control Valves

Featuring a flow rate of 15m³/h, the F77AS manual multiport softener control valve is equipped with two valve cores, one controlling the inflow of the water, the other responsible for outflow. The different functions such as service, backwash, brine and slow rinse, brine refill and fast rinse can be realized through rotating the handwheel counterclockwise to put the two pointers in the desired precision.

Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It has two valve cores. One controls inlet water, the other controls outlet water.

    No water pass the valve in regeneration in single tank type.

    Brine refill controlled by manual ball valve. （F77AS/61215，F77CS/91215）

    During service, manual ball valve will control to start the brine refill, in order to shorten the regeneration cycle time.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted.

    F77CS can be installed in top mounted or side mounted. (When side-mounted connector TOP side connected with top strainer, BOTTOM side connected with side bottom strainer) It’s up-flow for regeneration. If connector with side-mounted in upside down (TOP side connector with bottom strainer, BOTTOM side connected with top strainer) It’s for floating bed system.

    For filtration system

Drain outlet is the same size as water outlet. Block the brine line connector change the valve to F77BS filter valve.
Model:F77AS（61215）

Handle material:Plastic

Mount type:Top mount / side mount

Inlet/outlet:2"M

Drain:2"M，installed with 1.5"M flow control connector

Brine line connector:3/4"M

Mounting base:4" -8UN

Riser pipe:1.5" D-GB

Flow rate:15m³/h

Filter tank:24"--42"

Water pressure:0.2-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜2FTU

Application:Ion exchange equipment, water softener for boiler system, RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 15M^3/Hr 1.5"

N64D Manual Multiport Softener Control Valves

The N64D manual multiport softener control valve delivers a flow rate of 10m³/h. The valve is able to carry out the functions of service, backwash, brine and slow rinsing, brine refill, and fast rinsing through the rotation of the handwheel.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    No water pass the valve of single tank type in regeneration.

    Various methods for installation

    The valve can be top-mounted and side-mounted (Should be used with the side-mounted connector).

    Handle alternatives: Metal and plastic
Model:N64D（61210）

Handle material:Plastic

Mount type:Top mount / side mount
Inlet/outle:2"F

Drain:1"M

Brine line connector:1/2"M

Mounting base:2.5"-8NPSM

Riser pipe:1.5"D-GB

Flow rate:10m³/h

Filter tank:10"--30"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜5FTU

Application:Ion exchange equipment, water softener for boiler system,RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 10M3/Hr 1.5"  

F64A Manual Multiport Softener Control Valves

The F64A manual multiport softener control valve operates with a flow rate of 4m³/h. It carries out the functions of service, backwash, brine and slow rinse, brine refill, and fast rinse. The functions can be switched by rotating the handwheel.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    No water pass the valve of single tank type in regeneration.

    Various methods for installation

    The valve can be top-mounted and side-mounted (Should be used with the side-mounted connector).

    Handle alternatives: Metal and plastic

Model:F64A1/A2（61104/ 61204）

Handle material:Metal/plastic

Mount type:Top mount

Inlet/outle:1"F

Drain:1/2"M

Brine line connector:3/8"M

Mounting base:2.5"-8NPSM

Riser pipe:1.05"OD

Flow rate:4m³/h

Filter tank:6"--18"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜5FTU

Application:Ion exchange equipment, water softener for boiler system,RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 6M3/Hr 1"  

Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It has two valve cores. One controls inlet water, the other controls outlet water.

    No water pass the valve in regeneration in single tank type.

    Brine refill controlled by manual ball valve. （F77AS/61215，F77CS/91215）

    During service, manual ball valve will control to start the brine refill, in order to shorten the regeneration cycle time.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted.

    F77CS can be installed in top mounted or side mounted. (When side-mounted connector TOP side connected with top strainer, BOTTOM side connected with side bottom strainer) It’s up-flow for regeneration. If connector with side-mounted in upside down (TOP side connector with bottom strainer, BOTTOM side connected with top strainer) It’s for floating bed system.

    For filtration system

Drain outlet is the same size as water outlet. Block the brine line connector change the valve to F77BS filter valve.
Model:51215(F77BS)

Inlet/outlet:2"M

Drain:2"M

Base:4"-8UN

Riser pipe:1. 5" D-GB

Water treatment capacity:15 m³/h

Tank diameter range:10"~30"

Water pressure:0.2MPa～0.6MPa

Water temperature:5℃～50℃

Water turbidity:＜20FTU

Environment temperature:5℃～50℃

Relative umidity:≤95％(25℃)

RUNXIN MANUAL FILTER VALVE 15M3/Hr 1.5"

N56D Manual Multiport Filter Valve

The N56D manual multiport filter valve provides a flow rate of 10m³/h and adopts a corrosion resistant gasket for opening and closing. It can be applied as a service, backwash, or fast rinse valve. It can also work under pressure. With a rotating handwheel, you can easily switch the settings without turning off the pump. The filter can be used in residential filtration systems, swimming pool filtrating and RO pretreatment filtration systems.
Model:N56D1/D2（51110/ 51210）

Handle material:Metal/plastic

Mount type:Top mount / side mount

Inlet/outlet:2"F

Drain:2"F

Mounting base:4"-8UN

Riser pipe:1.5"D-GB

Flow rate: 10m³/h

Filter tank: 10"--24"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:＜20FTU

Application:Manganese and iron removal

Filter media:Quartz sand, activated carbon, manganese sand

RUNXIN MANUAL FILTER VALVE 10M3/Hr 1.5"

F56A Manual Multiport Filter Valve

The F56A manual multiport filter valve features a flow rate of 4m³/h and utilizes a corrosion resistant gasket for opening and closing functions. It can be used as a service, backwash, and fast rinse valve, even under pressure. With a handle, you can switch the settings easily without turning off the pump or the power. When selecting a valve setting, make sure to always depress the handle before turning.
Model: F56A1/A2（51104/51204）

Handle material: Metal/plastic

Mount type: Top mount

Inlet/outlet: 1"F

Drain: 1"F

Mounting base: 2.5"-8NPSM

Riser pipe: 1.05"OD

Flow rate: 4m³/h

Filter tank: 6"--12"

Water pressure: 0.15-0.6Mpa

Water temperature: 5-50℃

Water turbidity: ＜20FTU

Application: Activated carbon filter, sand filter
Filter media: Quartz sand, activated carbon

RUNXIN MANUAL FILTER VALVE 4M3/Hr 3/4"

Model: 51106(F56F)

Inlet/outlet: 1" F

Drain: 1" F

Base:2.5"-8NPSM

Riser pipe: 1" D-GB

Water treatment capacity: 6 m³/h

Tank diameter range: 6"`~14"

Water pressure: 0.15MPa～0.6MPa

Water temperature: 5℃～50℃

Water turbidity: ＜20FTU

Environment temperature: 5℃～50℃

Relative Humidity: ≤95％(25℃)

RUNXIN MANUAL FILTER VALVE 6M3/Hr 1"

Needle Valves is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, They are also usually used in flow-metering applications, especially when a constant, calibrated, flow rate must be maintained for a certain duration, such as the idle fuel flow in a carburetor, steam in the pipe from the power plant, as well as to provide shut off for the pressure gauge or on applicators in many industries.
1. Needle Valve Features& Applications:

    Accurate& Precise control flow rate and pressure.
    Provide reliable cutoff.
    Precise adjustment of flow, bearing resistance, and pressure regulation.
    It also can be used in pump start, turbine by-pass, flow discharge, air regulation, and Reservoir inlet.
    Small Size.
3. Needle Valve General Data:

    Pressure Range: 5000Psi-15000Psi(344Bar-10343Bar)
    Working temperatures: -54°C-649°C (-65°F-1200°F)
    Size:1/8''-1''(NPT), DN6-DN20, 
    Connection: Dual Ferrules, Flange, Thread, Welding.
    Application: Liquid or Gas, Steam, Water
    Body Material:316

NEEDLE VALVE SS 316

Needle Valves 
is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, They are also usually used in flow-metering applications, especially when a constant, calibrated, flow rate must be maintained for a certain duration, such as the idle fuel flow in a carburetor, steam in the pipe from the power plant, as well as to provide shut off for the pressure gauge or on applicators in many industries.
1. Needle Valve Features& Applications:

    Accurate& Precise control flow rate and pressure.
    Provide reliable cutoff.
    Precise adjustment of flow, bearing resistance, and pressure regulation.
    It also can be used in pump start, turbine by-pass, flow discharge, air regulation, and Reservoir inlet.
    Small Size.
3. Needle Valve General Data:

    Pressure Range: 5000Psi-15000Psi(344Bar-10343Bar)
    Working temperatures: -54°C-649°C (-65°F-1200°F)
    Size:1/8''-1''(NPT), DN6-DN20, 
    Connection: Dual Ferrules, Flange, Thread, Welding.
    Application: Liquid or Gas, Steam, Water
    Body Material:304

NEEDLE VALVE SS 304

FLOW METER  PANEL

1.Working Pressure:≤1MPa

2.Operating Temperature:0~65 centigrade

3.Accuracy:±4%

4.Body Material:Acrylic

5.Fitting Material:ABS or SS

6.Float Material:SS 
7.O-ring Material:Silicon rubber

8.Customized specifications are available

FLOW METER  ONLINE

PRESSURE GAUGE ONLINE 60 BAR BIG 4 ''

PRESSURE GAUGE PANEL 

PRESSURE GAUGE ONLINE 

Application: General
Temperature of Media: -20~180°C
Power: Manual
Media: Water Oil Gas
Structure: stop valve
Connection: Female Thread
Body material:stainless steel

GLOBE VALVE  SS 

Application:General
Power:Manual
Structure:BALL
Port Size:Threaded
Temperature of Media:Normal Temperature
Media:Water
Material:Stainless Steel
Size:1/4'' ~4''(DN6~100mm)
Pressure:1000PSI

BALL VALVE  SS

Application:General
Power:Pneumatic,Solenoid
Type:Water Heater Service Valves, Atmospheric Vacuum Breaker, Thermostatic Air-Vent & Vacuum Breaker, Temperature & Pressure Relief Valves, Pressure Reducing Control Valves
Structure:Pilot, Control
Port Size:1/4" ~2"
Temperature of Media:Medium Temperature
Media:Base
Material:Brass
Pressure:Medium
Max.Working pressure
7Mpa
Max.Working Temperature:0~130℃Type:Water Pressure Reducing Valves, Pressure Regulators, Air & Vacuum Release Valves, Temperature Regulating Valves, SOLENOID VALVES, ACCESS VALVES, Water Regulating Valves, Air Valves & Vents

SOLENOID VALVE NORMALLY CLOSED

SOLENOID VALVE  NORMALLY OPEN

Hello Pure

MOTORIZED BALL VALVE 63 HP

Description of Motorized Water Valve

Our motorized ball valve consists of on/off type or 3-point type actuator… series ball valve,which have compact structure,stable operation,excellent capacity of water stoppage, large water flow rate, zero dirt block and low torque. Winner motorized ball valves are widely used in HVAC system, heating system, water treatment system and some industrial equipment.


Application of Motorized Water Valve
HVAC system, heating system, Water treatment system, Industrial equipment
Operational mode of Motorized Water Valve
motorized ball valve is motor-operated by a type of WRA-63…, and WRA-63…A actuator. The actuator is controlled by a modulating on/off or 3-point control system and move the ball of the valve, to the opening position dictated by the control signal.


Technical data Valve body:
Medium: cold/hot water, with 50% glycol         
Temperature of medium: 2°C...90°C
Rated pressure: PN20                             
Pipe connector: internal thread                              
Ambient temp. range: −5…+60°C;0…90%RH

MOTORIZED THREE WAY VALVE 1''

SAUNA WOODEN CLOCK

SAUNA STONE X 20 KG

SAUNA WOODEN HYGROMETER

SAUNA DOOR

Oceanic

SAUNA CONTROLLER 7" TOUCH SCREEN

SAUNA RESISTANCE 3KW

SAUNA LAMP

SAUNA BUCKET AND LADLE

SAND TIMER H2

SAND TIMER

1. Temperature setting 50-110℃ or 122-230℉;  
 
2. Sequential heating to save energy and prolong the working life of the elements;

3. Door interlock  (new EU standard  for ensuring safety).
 If the sauna cabin door is opened, the timing will stop and the sauna
heater will not restart again until it is reset;

4.  Control panel + control box, high voltage and low voltage are separately;

5.  Three control panels options for different application requirements.

SAUNA ESSANCE OIL

Round resistance heaters for steam generator Round it to replace a worn or defective resistance. (check the shape of your resistance on your steam generator) Choose the right model in the options! 4kw resistance is actually a strength of 4.5kW measure: 24 x 5 cm (length x width) 13 cm of perimeter

STEAM RESISTANCE

High quality steam bath door made of 8mm toughened safety glass.

Lux series steam doors are equipped with Premium type high quality hinges, Premium 400 mm metallic handle and magnetic lock system.

Door frames are made of anodised aluminium that is resistant to hight levels of humidity and water, which ensures long term usage

STEAM DOOR

The Oceanic OCSB controller keypad controls the time, temperature, lighting and fan. It can be mounted up to 10m from the main control box, typically on the front of the cabin.

This keypad can only be used with an Oceanic sauna heater.OCSB Controller Keypad for Oceanic Sauna Heaters:

    Time
    Temperature
    Lighting
    Fan 
    12 hour timer
    Oceanic Sauna Heaters only

STEAM CONTROLLER OCB

Automatic Drain Valve for Steam Generator The automatic drain valve is designed to ensure efficient cleaning of the steam generator. It activates at set time intervals and automatically when the steam generator is turned off. The main function of this valve is to remove accumulated lime deposits inside the steam generator. Regular and complete removal of lime deposits significantly extends the equipment's lifespan, ensuring its uninterrupted operation and increasing energy efficiency. Features: Automatic activation: Works at set intervals and when the steam generator is turned off. Effective cleaning: Allows complete removal of lime deposits, preventing their accumulation. Extended lifespan: Regular removal of deposits prevents damage and extends the lifespan of the steam generator. Ease of use: Easy to install and operate without the need for constant monitoring. Advantages: Reduced maintenance costs: Less need for manual cleaning and equipment repair. Increased performance: Supports optimal operation of the steam generator by preventing lime build-up. Time-saving: Automated cleaning process frees up time for other important tasks. The automatic drain valve is an indispensable element for any steam generator, ensuring its reliable and efficient operation for many years.

STEAM GENERATOR DRAIN VALVE

FOOT MASSAGE

SPA AIR WATER INLET 50*50 HY

Emaux

SPA AIR WATER INLET 50*50 EMAUX

SPA AIR WATER INLET 50*32 EMAUX

SPA AIR WATER INLET 32*32 EMAUX

Aqua

IN 1.5" female threaded OUT 1.5" male thearded

NOZZLE FOR SPA

NINE HOLE JET

AIR REGULATOR FOR SPA

HOSE FOR AIR SWITCH

Material: ABS+PVC+stainless steel;Rated current: 16A;Rated voltage: 125-250V. These air buttons can be used for any remote control purpose.As a remote control device, it has the advantage of being small in size and can be built into most engine connection boxes. The switch can be used with pneumatic buttons for water and electricity separation and remote control purposes.It is widely used in food waste disposer, massage tub, pumps for swimming pools and spas, hot tubs,outdoor machines, automotive applications etc. Press the pneumatic button for the first time to start the pneumatic switch. Release the air button and the switch will still remain in the starting state. After pressing the pneumatic button for the second time and releasing, close the pneumatic switch.

PUSH BUTTON FOR SPA

PENUMETIC SWITCH FOR SPA

Plastic ABS grade A with UV stabilized For residential and commercial concrete pools Able to use with concrete, fiberglass and vinyl pool

LINER DRAIN FOR SPA

AQUARAM

Description This 1/2 inch Schedule 40 flexible PVC pipe is for pool and spa repair and is sold and priced per foot. This is measured as a nominal Schedule 40 PVC pipe size of 1/2 inch with an inside diameter of approximately .602 inches. Schedule 40 Flexible Pipe easily gets into hard-to-get-at spots. Replaces rigid pipe for plumbing pool, spa, or hot tub installations. It has the same outside diameter as Schedule 40 PVC rigid pipe and fits all Schedule 40 fittings. This flex pipe is sun, ozone, and mildew resistant. It has less heat loss compared to copper and steel piping. Flex pipe rolls are available in 50 foot increments. Prices are per feet. Please enter the number of feet needed. Product Features Inside diameter approximately .602 inches Outside diameter approximately .840 inches Rated at 140 Degrees F Sun, ozone and mildew resistant Has less heat loss than copper and steel piping

HOSE FOR SPA

COMPACT AND LIGHTWEIGHT The CF Series Filter comes with a UV-resistant tank and a heavy-duty ring-lock lid which allows easy cleaning and replacement of the cartridge element. A screw-type air bleed valve releases trapped air inside the filter tank. The high-quality oil-filled pressure gauge provides an easy overview of the operating pressure. Product Features Tank Material: UV Resistant Plastic Max operating pressure 250kPa/36psi(2.5bar) Max temperature of 40°C (104°F) Cartridge filter element Pressure gauge Universal standard of union connection

FILTER FOR SPA

EXCELLENT FILTRATION PERFORMANCE Emaux cartridge filter elements are made of high-quality fabric material that provides efficient and effective filtration of dirt, debris, and other particles from pool or spa water. They are designed to be durable and long-lasting, with a strong, sturdy frame and high-quality materials that resist chlorine degradation and can withstand the demands of filtration. Available in a wide range of sizes and configurations, making it easy to find the right filter element to fit your specific pool or spa filtration needs. To keep the water clean, clear, and free of contaminants, Emaux cartridge filter elements are the best choice.

Top Categories

Cooperation