GP250 Float Switch High Pressure Submersible Water Pump
GP250 Float Switch High Pressure Submersible Water Pump
INSTALLATION AND USE
Suitable for use with liquids that does not contain abrasive particles. 
As a result of their reliability and the fact that they are easy to use, they are suitable for use in applications such asdomestic, gardening, irrigation and emptying tanks.
MOTOR FEATURE
lnsulation ClassB
Protection IP68
Thermal protector
Continuous service S1
Two-pole induction motor
Single-phase 220V/50Hz, 60Hz on demand
Three-phase 380V/50Hz, 60Hz on demand
OPERATING CONDITION
Maximum immersion depth 5m
Liquid temperature up to 60°C
Ambient temperature up to 40°C

SUBMERSIBLE PUMP 1HP AQUA

Product Description
Capability & features:
1. Light, small and little noise
2. It is elective for you to adjust its aerator
3. You can adjust the angle to give water
4. Main nog is made up from stainless steel and engineering plastic
5. Please fill the electromotor with fresh water

SUBMERSIBLE AERATOR

* Hailea ACO-500 AC Air Compressor Pumps
Power :- 500 W
s Pressure :- 0.045 Mpa
« Output :- 300 L/min
* Noise :- <60dB
* Weight :- 8.6 kg
AYMENT & SECURITY >

MAGNETIC AIR BLOWER 275L/H

HAILEA HAP-120 AIR PUMP for Big Fish tank

Hailea HAP-120 Hi-Blow Air Pump is an advanced air-compressing system, with sound damping and a multilevel muffler for extremely low noise levels. Compact design for long service life with lowest energy consumption. Lightweight aluminum alloy case for quick heat dissipation. Diaphragms are made from special artificial rubber for long life and a steady air output and pressure. It’s Suitable for Aquaponics and Biofloc Fish Farming.
Special artificial rubber to keep a steady air output and pressure. Advanced air compressing system, damping system, and multilevel muffler which is extremely low in noise. The structure is reasonable and compact, it is long service life and acquires the best effect with the lowest energy consumption. Aluminium alloy case, quick in heat dissipation and easy to move Specification – Model : HAP-120, Max Pressure : >0.038Mpa, Power : 90W, Output: 120L/min, Voltage : 110-115/220-240V, Noise : 45dB, Frequency : 50/60Hz, Weight: 9.5kg, Common Pressure : 0.018Mpa, Size: 265x215x198mm

MAGNETIC AIR BLOWER 120L/H

With low energy consumption, AB Series Economy Air Blower offers high-efficiency operation in a compact design that fits for limited space installation.
1. Continuous duty rating with quality motors
2. Blowers are CE certified and can be customized for any application
3. High-temperature designs for up to 50 degree C
4. Assorted coatings and platings for corrosive environments
5. Available for 50Hz and 60Hz

ECONOMY AIR BLOWER

Product Description

Characteristic

High pressure blower can be used in almost all areas without pulsating vacuum and pressure

operation requirements. This kind of blower can be installed horizontally or vertically. Die casting

aluminum material makes the structure extremely strong.

High Efficient

High pressure blower is equipped with 1.2service factor high efficiency motor, cold -rolled

silicon steel core and high temperature sealing bearing, effectively reduce working temperature rise and

guarantee the sustainability of operation. The precision clearance between the cavity and impeller makes

the air medium stable with pressure output.

Not Maintained

Permanent sealed high temperature bearings, aircooled motors and contactless impellers can ensure full

maintenance free operation.

Environmental Protection

Oil-free compression and built-in silencers and high-efficiency motors allow the GB Vortex high pressure

blower to run quietly with low power consumption.

RING AIR BLOWER  DOUBLE STAGE

Vortex high pressure blower can be used in almost all areas without pulsating vacuum and pressure operation requirements.This kind of Blower can be installed horizontally or vertically . Die casting Aluminium material makes the structure extremely strong.
product description
1.High Efficiency 
2.Such Vortex high pressure blower is equipment with 1.2 service factor high efficiency motor . 
3.Cold-rolled silicon steel core and high-temperature sealing bearing,which could effectively  reduce working  temperature rise  and  guarantee the sustainability of operation.           
4.The precision clearancebetween the cavity and impeller makes the air medium stable with .
5.Easily Maintaince :Permanent sealed high temperature bearings ,air cooled motors and contactless impellers can  ensure full maintenance free operation 
6.Environmental Protection:Oil-free compression and built-in silencers and high-efficiency motors  GB vortex  high pressure blower to run quietly with low  power consumption.
7.GB/XGBVortex high pressure blower is according to the principle of pulse,
the kinetic energy generated by the rotating impeller is transmitted to the pump medium and converted into the pressure.
8.The side channels formed by the impeller and the aluminium housing directly mounted on the  drive motor shaft allow the medium to be compressed and then discharged through the muffler  on the pressure side.

RING AIR BLOWER SINGLE STAGE

Micro bubble disc aerator fine bubble membrane air diffuser is used to transfer air and with that oxygen into sewage or industrial wastewater. Oxygen is required by microorganisms in the water to break down the pollutants. Fine bubble diffusers produce a plethora of very small air bubbles which rise slowly from the floor of a wastewater treatment plant or sewage treatment plant aeration tank and provide substantial and efficient mass transfer of oxygen to the water. The oxygen, combined with the food source, sewage, allows the bacteria to produce enzymes which help break down the waste so that it can settle in the secondary clarifiers or be filtered by membranes.

FINE BUBBLE AIR DIFFUSER 

Coarse Bubble Disc Diffuser is used to provide a homogeneous mixture in chemical preservation units, equalization tanks, chemical mixing and oil separation of wastewater treatment plants. The projection of each diffusers of Aquaflex was done after Research and Development studies that response the requests of waste water treatment plants. Materials used in Aquaflex diffusers are carefully selected according to the processes of wastewater treatment plants and tested regularly before shipment.
- Coarse Bubble Disc Diffusers can be installed to HDPE, PVC or stainless steel pipes by PP Saddles.
- Material of body part is PP (polypropylene) and supported with %30 GPR for UV rays and different chemical processes.
- Standart material of diffuser membranes are EPDM. Also Aquaflex supports the customers with PTFE COATED membranes for different treatment processes.
- Membrane hole diameter is 4 mm and distributed equally around the membrane.
- It warrants between 20%-25% oxygen efficiency.
- It holds energy costs very low because of minimum pressure loss.

Top Categories

Cooperation