Feature
FL-8860 with TM-1 Ultrasonic Flows
Support Heat Measurement
High Accuracy
Better than ±1%
Wide Measuring Range
Several types transducer for selection, pipe size from DN15mm to DN6000mm
High Reliability
Adopt low voltage, multi-pulse technology to improve accuracy, useful life and reliability.
Strong Anti-interference
Dual-balance signal differential receiver/driver circuit to avoid interference of converter, TV tower, high voltage line etc.
Powerful Recording Function
Automatically record the following data:
1. The totalizer data of the last 512 days/128 months/10 years
2. The time and corresponding flow rate of the last 64 times of power on and off events
3. The working status of the last 32 days
Far transmission distance, easy for networking
RS485 support wireless network, connect GPRS module to accomplish wireless transmission .
t
Connect the temperature transducer , can finish the heat/ energy measurement
Liquid Type
This flowmeter can be virtually applied to a wide range of measurement. A variety of liquid
applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent. etc

Ultrasonic Flow Meter

Large LCD Screen & Monitor Flow Rate
Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.


Quantitative control
Controller will turn off the solenoid value automatically when flow reach to the setting value you desire.

 Work with all hall effect flow sensor
It can work various different flow sensor through adjust the K value
TECHNICAL SPECIFICATIONS
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC, Output: 12VDC, max 2A
Adapter lead length: 1m
Measuring Accuracy: ±1%
Output for Solenoid valve: 12VDC, max 2A
Temperature Sensor: 0-100℃/32-212℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
Max Total Volume : 999999 G/L
Quantitative Range: 0-9999 G/L
Flow Rate Range: 0-9999.99/LPM(GPM)
Cable Length : 1m
Dimensions: 88mmx126mmx30mm
Weight: 200g
Operation Environment: Temperature: 0-50℃/32-122℉ Relative Humidity: <85%

For G1" Flow Sensor:
Flow range:1-60L/min
Allow compression:Water pressure 1.75 Mpa below
Sensor:Hall effect
Cable length:15cm
Frequency: F=4.8 * Q (L / Min)

For G1" Solenoid Valve:
G1",thread male outer diameter: 32.5mm
Working pressure:0.02-0.8Mpa
Working Voltage:DC12V

DIGITAL FLOW METER - CONTROLLER

Infinity Flow meter controller has a flow sensor with magnetic
multi-blade spinning rotor(impeller) mounted inside at right angles to the
flow. The rotational speed of the impeller is proportional to the velocity
of the fluid. The pulse generated is transmitted and converted into
volumetric measurement. These controller are calibrated and to give
reliable flow measurement
FEATURE
Easy Size Selection OF Flow Sensor’s
7A / 230V Relay For Every Tripping
Alphabetical 16×2 LCD Display for Easy Monitoring
Two different size OF Flow sensorS can connect & monitor
Display can show Total Volume in liter as well m³
15mm, 20mm, 25mm, 40mm, 50mm different sizes can Support

FLOW CONTROLLER INF

FLOW METER  PANEL

1.Working Pressure:≤1MPa

2.Operating Temperature:0~65 centigrade

3.Accuracy:±4%

4.Body Material:Acrylic

5.Fitting Material:ABS or SS

6.Float Material:SS 
7.O-ring Material:Silicon rubber

8.Customized specifications are available

Top Categories

Cooperation