Aqua

Manual mixer produced by the Italian company AQUA, designed for mixing various chemical reagents (acid and alkali solutions) in tanks. They are intended for installation on a working container for the purpose of preparing and maintaining chemical reagents in a condition suitable for pumping by pumps. Containers are attached from above. The mixer is made of PVC. The Aqua A-TANK-1 capacity of 100 liters is suitable for this mixer.

MANUAL MIXER PVC SHAFT 60CM

The Etatron AP range of piston dosing pumps are designed for applications requiring larger precise flow rates up to 190L/hr and higher pressures up to 20 bar. This range is not suitable for use with liquids containing abrasive or solid particles. This metering pump series can be controlled in various ways depending on application requirements, including; 4-20 mA signal and inverter control.



The metering pump head is available in either PVC, PVDF or stainless steel AISI 316 depending on the nature of the fluid. Seal materials options include; NBR, FPM and EPDM. This combination of materials options make this pump range suitable for a wide range of fluids and applications.



This dosing piston pump series is ideal for many applications in the industrial and marine markets, including; chemical dosing for maintaining PH levels in water treatment processes, Legionella dosing, biocides,  OEM dosing systems, reverse osmosis, chemical injection and chemical dosing for agriculture.





Product Summary 



•                      Etatron AP series piston metering pump

•                      Larger precise flow rates up to 190 L/hr

•                      Discharge pressures up to 20 bar

•                      10% to 100% stroke length adjustment

•                      Pump head available in  PVC, PVDF  or stainless steel AISI 316

•                      Seals available in NBR, FPM or EPDM

•                      Fitted with either single or double ceramic ball valves

•                      4-20 mA control possible with optional servo motor mechanism

•                      Level control supported

•                      Can handle fluids with viscosities up to 2000cp

•                      Self-priming

•                      120 strokes per minute maximum

•                      Aluminium casing with epoxy/acid proof coating

•                      IP55 motor protection

•                      Single phase 230V, 110V or three phase 230/400V 50/60Hz motors available

•                      Available with Atex motor for installation in non-safe areas

•                      Available with motors suitable for operation via external inverter (variable frequency drive VFD)

DOSING PUMP AQUA PH W/O PROB

AQUA HC997 is multifunction solenoid driven dosing pump with constant and proportional dosing with push buttons interface and digital LCD display for programming.

General Specifications:

LCD Display with Backlight
5 pushbutton interface
Constant Mode: flow rate, time, quantity, cyclic
Proportional Mode: 4-20mA input, pulse input, PPM
Time Mode: Daily or Weekly
Alarm: Level & Flow
Relay output
Maximum Flow 14 l/hr @ 0 bar
Maximum Pressure 20 bar @ 2 l/hr
Tube Connection Size 4mm x 6mm
Power Supply 230VAC
ON / OFF Switch
Level Input (pump interlock)
Wall & Bench Mounting Kit
IP65 Rating
Wetted Parts:

Pump Head PVDF
Ball Valves PTFE
Valve Body PVDF
Fittings PVDF
Injection Valve PVDF, Hastelloy, PTFE
Foot Valve PVDF
Seals Viton or EPDM

DOSING PUMP AQUA 5L/8BARS DIGITAL WITH AUX O/P

Solenoid metering pump with constant flow rate, with pulse frequency regulation.
• Dosing adjustment knob
• Dual regulation range 0-100%, 0-20% via switch
• Standard power supply 230Vac – 50/60Hz. Other power supplies on request
• On-Off switch
• Manual priming valve
• Green pump on LED, red LED for pump dosing pulses
• Materials: Pump body: PP; spheres: Pyrex®, O-rings: Viton® or Dutral

• POWER SUPPLY: 24 VAC; 24 VDC; 12 VDC

Top Categories

Cooperation