Made of white ABS, UNA resistant to the chemical compounds of the pool water.

Easy to install.

Connection 1.5'' or 2''.

Flow rate 5 or 8 m³/h.

SKIMMER FOR POOL

Square main drains for pools.

Grille 175×175. Connection 2″.

MAIN DRAIN SQUARE

Made of white ABS, UVA unalterable and resistant to chemicals common in a pool.
LED lamps of low consumption and high light performance.
Possibility of changes in the colour of the light with programmable cycles.

SWIMMING POOL LIGHT WITH NICH 300W

High Flow Plastic pumps.
Centrifugal electric pumps for swimming pools, with built-in pre-filter, ideals for high flow at low pressure.
Pre-filter with transparent lid in polycarbonate which allows easy observation of the pre-filter basket. The pre-filter is closed with a knob system of easy accessibility.
Pump body and pre-filter made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time.
Bronze, plastic or stainless steel impeller, according to model.
Motor shaft manufactured in stainless steel AISI 316L.
Pre-filter basket in stainless steel too.
Motors with IP-55 protection, at 2.850 r.p.m. Tension of mains feed at 230/400V-50Hz or 400/690V-50Hz (7,5, 10 and 12,5 HP) three-phase.
Versions from 4HP to 12,5HP.
Possibility of AISI 316L stainless steel impellers upon request.

SWIMMING POOL PUMP IML ATLAS SERIES

Self-priming centrifugal electric pump for swimming pools. Self-priming at 2 m.
Built-in pre-filter of great capacity (8 litres).
Pre-filter with transparent lid in polycarbonate which allows easy observation of the pre-filter basket. The pre-filter is closed with a knob system of easy accessibility.
Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time.
Mechanical seal in graphite and ceramics.
Motor shaft manufactured in stainless steel AISI 316L.
Motor with IP-55 protection, at 2.850 r.p.m. Tension of mains feed at 230/400V-50Hz three-phase (Ask for 400/690V-50Hz versions).
Possibility of IE2 Efficiency Motors upon request
Possibility of 60Hz upon request.
Versions of 3HP, 4HP and 5,5HP.
Suction connection Ø90 mm, return connection Ø75 mm. Both supplied with bush connections.

SWIMMING POOL PUMP IML 4HP DY SERIES

Self-priming electric pump for swimming pools, with built-in pre-filter of great capacity
Pre-filter with transparent lid in polycarbonate which allows easy observation of the pre-filter basquet. The pre-filter is closed with a knob system of easy accessibility
Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time.
Mechanical seal in graphite and ceramics
Motor shaft manufactured in stainless steel AISI316L
Enclosed motor, totally silent, with IP-55 protection, at 2.850 r.p.m
Tension of mains feed at 230V-50Hz sigle phase or 230/400V-50Hz three-phase
Possibility of 60Hz upon request
SE2N

2” inner thread connections
Installation dimensions exactly the same as the old Series Europa

SWIMMING POOL PUMP IML SE SERIES

Self-priming electric pump for swimming pools, with built-in pre-filter.
Pre-filter with transparent lid in polycarbonate which allows easy observation of the pre-filter basket. The pre-filter is closed by means of a thread, ensuring the perfect adjustment of the lid.
Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time.
Pump body lid and diffuser in Noryl. Impeller in Noryl with shaft in stainless steel.
Mechanical seal in graphite and ceramics.
Motor shaft manufactured in stainless steel AISI 316L.
Enclosed motor, totally silent, with IP-55 protection, at 2.850 r.p.m. Tension of mains feed at 230V-50Hz single-phase or 230/400V-50Hz three-phase.
Possibility of 60Hz upon request.
Connections of suction and return at 2 ¼” for Ø 50 mm bush connections.
Bush connections included with the pump.

SWIMMING POOL PUMP IML SA SERIES

High-flow centrifugal pump.
Pump body made in polypropylene reinforced with fibreglass, resistant to the chemical products in the swimming pool, guaranteed to last a long time.
Impeller in Noryl.
Mechanical seal in graphite and ceramics.
Motor shaft manufactured in stainless steel AISI 316L.
3CV single-phase motors at 230V-50Hz, or three-phase 3HP, 4HP or 5,5HP at 230/400V-50Hz motors, all at 2.850 r.p.m. and IP-55 protection.
Possibility of 60Hz upon request.
Connections of suction and return at 3 ½” for Ø 75 mm bush connections.
Bush connections included with the pump.

COUNTER CURRENT PUMP IML

Made of polyester resin and fibreglass (with plastic base).
Excellent finish.
Plastic lid large diameter.
Fitted with 1” collector arms and diffuser in unalterable plastic.
Fitted with pressure gauge, water drain, and air drainage.
Connections to multiport valve with six positions: filter, backwash, rinse, recirculation, waste and closed.
Maximum working pressure: 2,5 Kg/cm2.

LAMINATED FILTER IML SIDE

Made of polyester resin and fibreglass (with plastic base).
Excellent finish.
Fitted with 1” collector arms.
Fitted with pressure gauge, water drain, and air drainage.
Multiport valve with six positions: filter, backwash, rinse, recirculation, waste and closed.
The clamping ring is available as spares and can be replaced without removing the sand or disassembling the interior of the filter.
Maximum working pressure: 2,5 Kg/cm2.

LAMINATED FILTER IML TOP

Range of filters diameters from 1050 to 2500 mm, with 1 m filtration height.
Designed for use in public swimming pools.
Manufactured by spraying on layers of polyester resin and fibreglass strands.
Excellent gel-coat exterior finish.
Base made of polyester.
Ø400 upper lid with nuts.
Interior parts made of unalterable plastic UPVC.
Can be connected to 4 / 5 valves manifold.
Maximum working pressure: 2,5 Kg/cm2.
Maximum working temperature: 40 ºC.
Nozzle Plate: optional upon request.

Top Categories

Cooperation