Runxin

N77 Automatic Multiport Softener Valves

Allowing a flow rate of 18m³/h, the N77A automatic multiport softener valve features a planar and corrosion resistant gasket for opening and closing. It is equipped with two valve cores, one controlling the inflow of the water and brine, the other controlling outflow and drainage. The N77A1 is a timer clock type while the N77A3 is meter type.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted. Screen is moveable.

    No water pass the valve during regeneration in single tank type

    Brine refill controlled by electronic ball valve.

    During service, electronic ball valve will control to start the brine refill. In order to short the regeneration cycle time.

    For filtration system

    Drain outlet is the same size as water outlet. Block the brine line connector change the valve to N77B filter valve.

    Manual function

    Realize regeneration immediately by pushing “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    LED dynamic screen display

    The stripe on dynamic screen flash, it indicates the control valve is in service, otherwise, it is in regeneration cycle.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator light on which represent buttons are locked. Before operation press and hold the “Up”and“Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    It can choose time clock type or meter type by program selection

    Through the switch in control board ((Application refer to Page16) to realize time clock type by day or by hour and meter type. (Attention: after adjust the switch, the valve should be cut off the power then connect again. Meter type valve have one more flow meter and cable then time clock type valve.)

RUNXIN AUTOMATIC SOFTENER VALVE TIMER 18M3/Hr

N74A Automatic Multiport Softener Valves

Featuring a flow rate of 10m³/h, the N74A automatic multiport softener valve can realize different functions such as service, backwash, brine and slow rinse, brine refill and fast rinse through various parameter modifications.


Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    Variety of installation methods

    Use side-mounted connector can change N74B from top mounted to side mounted, and screen is movable.

    No water passes the valve in regeneration in single tank type

    Manual function

    Realize regeneration immediately by pressing“Manual/Return”at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other parameters do not need to reset. The process will continue to work after power on.

    LED dynamic screen display

    The stripe on dynamic screen flash, which indicates the control valve is in service, otherwise, it is in regeneration cycle.

    Buttons lock

    No operations to buttons within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    It can choose time clock type or meter type by program selection.

    Can realize interchange between time clock type by day or by hour and meter type by dialing a switch on main control board. (Check figure on P18) (Attention: After dialing the switch, it needs to reconnect the power. The meter type product has one flow meter and flow meter cable, but the time clock type product doesn’t have.)

    Four kinds of meter type can be selected (Suit for N74A3, N74B3)

Mode
	

Name
	

Instruction

A-01
	

Meter delayed regeneration
	

Regenerate on the day although the available volume of treated water drops to zero (0). Regeneration starts at the regeneration time.

A-02
	

Meter immediate regeneration
	

Regenerate immediately when the available volume of treated water drops to zero (0).

A-03
	

Intelligent meter Delayed regeneration
	

Meter delayed regeneration type, but by setting resin volume, feed water hardness, regeneration factor, the controller will calculate the system capacity.

A-04
	

Intelligent meter immediate regeneration
	

Meter immediate regeneration type, but by setting resin volume, feed water hardness, regeneration factor, the controller will calculate the system capacity.

    Interlock Function

It has a function of interlock to realize only one valve in regeneration but the other valves are in service while several valves parallel in system. In multi-steps treatment systems such as RO pre-treatment, when several valves are in series, there is only one valve in regeneration or washing to ensure pass water all the times while different valves in regeneration or washing.


Related products

RUNXIN AUTOMATIC SOFTENER VALVE TIMER 10M3/Hr

F116Q Automatic Multiport Softener Valves

Featuring a flow rate of 5m³/h, The F116Q automatic multiport softener valve adopts a planar and corrosion resistant gasket for opening and closing. The different functions such as service, backwash, brine and slow rinse, brine refill and fast rinse can be realized through parameters modification. The F116Q1 is a timer clock type while F116Q3 is a meter type.
Product Characteristics

    Simple structure and reliable sealing

    The distribution valve adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Fast Rinse and Brine Refill.

    No water pass the valve in regeneration in single tank type.

    Manual function

    Realize regeneration immediately by pushing manual button “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    The valve will automatically rotate for more than ten seconds after it is electrified

    After the valve is electrified, it will automatically rotate for more than ten seconds to turn back to the position when the electricity is cut off.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    Interval backwash times (Suitable for F68Q/F69Q)

    It could set up interval backwash times for F68Q/F69Q up-flow regeneration valve, which means several times of services but one time of backwash. The setting of interval backwash times depends on the local water turbidity. (The lower the turbidity is, the longer of the interval backwash times can be set)

    It can choose time clock type or meter type by program selection

    When all symbols light on, press and hold “Manual/Return” and “Menu/Confirm” buttons for 5 seconds to enter the menu of valve model selection. Please set the program type in accordance with the product type. (Tim clock type by days or meter type) (Notice: The meter type product has one flow meter and flow meter cable, but the time clock type does not ).

RUNXIN AUTOMATIC SOFTENER VALVE TIMER 5M3/Hr

F67P1 Automatic Multiport Filter Valves

The F67P1 automatic multiport filter valve features a flow rate of 4m³/h. It can realize service, backwash, and fast rinse functions through simple parameter modification.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse for softener or Service, Backwash and Fast Rinse for filter.

    No water pass the valve in regeneration in single tank type.

    Manual function

    Realize regeneration immediately by pressing " Manual/Return" at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “12:12” will flash to remind the people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    The valve will automatically rotate for dozens of seconds after it is electrified

    After the valve is electrified, it will automatically rotate for dozens of seconds to turn back to the position when the electricity is cut off.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator lights on which represent buttons are locked. Before operation, press and hold the “ Up”and“ Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    Interval backwash times (Suitable for F68P/F69P)

    It could set up interval backwash times for F68P/F69P up-flow regeneration valve which means several times of services but one time of backwash. The setting of interval backwash time depends on the local water turbidity. (The lower the turbidity is, the longer of the interval backwash time can be set)

    It can choose time clock type or meter type by program selection

    When all symbols light on, press and hold Menu/Confirm and Manual/Return buttons for 5 seconds to enter the menu of valve model selection. Please set the program type in accordance with the product type. (Time clock type by days or meter type) (Note: The meter type product has one flow meter and probe wire, but the time clock type doesn’t have).

    Maximum interval regeneration days

    Under the situation of service reaching the setting days and the volume not yet, it could enter into regeneration process forcibly when current time is the same as regeneration time.

    All parameters can be modified

    According to the water quality and usage, the parameters in the process can be adjusted.

RUNXIN AUTOMATIC SOFTENER VALVE TIMER 4M3/Hr

F117Q Automatic Multiport Softener Valves

Featuring a flow rate of 3m³/h, the F117Q1/Q3 automatic multiport softener valve adopts a planar and corrosion resistant gasket for opening and closing. The different functions such as service, backwash, brine and slow rinse, brine refill and fast rinse can be realized through parameters modification. The F117Q1 is a timer clock type while F117 Q3 is a meter type.
Product Characteristics

    Simple structure and reliable sealing

    The distribution valve adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Fast Rinse and Brine Refill.

    No water pass the valve in regeneration in single tank type.

    Manual function

    Realize regeneration immediately by pushing manual button “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    The valve will automatically rotate for more than ten seconds after it is electrified

    After the valve is electrified, it will automatically rotate for more than ten seconds to turn back to the position when the electricity is cut off.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    Interval backwash times (Suitable for F68Q/F69Q)

    It could set up interval backwash times for F68Q/F69Q up-flow regeneration valve, which means several times of services but one time of backwash. The setting of interval backwash times depends on the local water turbidity. (The lower the turbidity is, the longer of the interval backwash times can be set)

    It can choose time clock type or meter type by program selection

    When all symbols light on, press and hold “Manual/Return” and “Menu/Confirm” buttons for 5 seconds to enter the menu of valve model selection. Please set the program type in accordance with the product type. (Tim clock type by days or meter type) (Notice: The meter type product has one flow meter and flow meter cable, but the time clock type does not ).

RUNXIN AUTOMATIC SOFTENER VALVE TIMER 3M3/Hr

F112A Automatic Multiport Softener Valves

The F112A automatic multiport softener valve features a flow rate of 40m³/h. The F112A3 comes with 4 ports in a T-configuration within the valve body. Unfiltered water is brought in from the pump port, which is sent to different passages for treatment. The different flow passages are easily controlled through pushing or pulling the hydraulically balanced pistons in the valve. Also, the F112A3 is equipped with a booster pump which makes it possible to ensure normal piston operation when the inlet pressure is under 0.2MPa. This device can be used in boiler softening systems and softening in RO pretreatment.

RUNXIN AUTOMATIC SOFTENER VALVE VOLUMETRIC 40M3/Hr

RUNXIN AUTOMATIC SOFTENER VALVE VOLUMETRIC 18M3/Hr

RUNXIN AUTOMATIC SOFTENER VALVE VOLUMETRIC 10M3/Hr

RUNXIN AUTOMATIC SOFTENER VALVE VOLUMETRIC 5M3/Hr

Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted. Screen is moveable.

    No water pass the valve during regeneration in single tank type

    Brine refill controlled by electronic ball valve.

    During service, electronic ball valve will control to start the brine refill. In order to short the regeneration cycle time.

    For filtration system

    Drain outlet is the same size as water outlet. Block the brine line connector change the valve to N77B filter valve.

    Manual function

    Realize regeneration immediately by pushing “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    LED dynamic screen display

    The stripe on dynamic screen flash, it indicates the control valve is in service, otherwise, it is in regeneration cycle.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator light on which represent buttons are locked. Before operation press and hold the “Up”and“Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    It can choose time clock type or meter type by program selection

    Through the switch in control board ((Application refer to Page16) to realize time clock type by day or by hour and meter type. (Attention: after adjust the switch, the valve should be cut off the power then connect again. Meter type valve have one more flow meter and cable then time clock type valve.)

RUNXIN AUTOMATIC FILTER VALVE 18M3/Hr

N75A Automatic Multiport Filter Valves

Featuring a flow rate of 10m³/h, the N75A automatic multiport filter valve adopts a planar and corrosion resistant gasket for opening and closing. The different functions such as service, backwash and fast rinse can be realized through simple parameter modifications. The N75A1 is a timer clock type while the N75A3 is a meter type.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, and Fast Rinse.

    No water pass the valve in rinsing in single tank type

    Manual function

    Realize rinsing immediately by pressing “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3days, the time of day indicator “12:12”will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    LED dynamic screen display

    The stripe on dynamic screen flash, it indicates the control valve is in service; otherwise, it is in rinsing cycle.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator light on which represent buttons are locked. Before operation，press and hold the “Up”and“Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    Rinsing frequency

    It could set up multiple rinsing times, which means several times of backwash and fast rinse but one time of service. It is much better for cleaning the filter materials.

    All parameters can be modified

    According to the water quality and usage, the parameters can be adjusted.

    It can choose meter type or time clock type

    Remote handling input

    This connector can receive external signal, used together with PLC, and computer etc. to control the valve.

    Interlock function

    It has a function of interlock to realize only one valve in rinsing, but the other valves are in service while there are several valves parallel in system. In multi-steps treatment systems such as RO pre-treatment, when several valves are in series, there is only one valve in rinsing to ensure pass water all the times while different valves in rinsing.

RUNXIN AUTOMATIC FILTER VALVE 10M3/Hr

Product Characteristics

    Simple structure and reliable sealing

    The distribution valve adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Fast Rinse and Brine Refill.

    No water pass the valve in regeneration in single tank type.

    Manual function

    Realize regeneration immediately by pushing manual button “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    The valve will automatically rotate for more than ten seconds after it is electrified

    After the valve is electrified, it will automatically rotate for more than ten seconds to turn back to the position when the electricity is cut off.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    Interval backwash times (Suitable for F68Q/F69Q)

    It could set up interval backwash times for F68Q/F69Q up-flow regeneration valve, which means several times of services but one time of backwash. The setting of interval backwash times depends on the local water turbidity. (The lower the turbidity is, the longer of the interval backwash times can be set)

    It can choose time clock type or meter type by program selection

    When all symbols light on, press and hold “Manual/Return” and “Menu/Confirm” buttons for 5 seconds to enter the menu of valve model selection. Please set the program type in accordance with the product type. (Tim clock type by days or meter type) (Notice: The meter type product has one flow meter and flow meter cable, but the time clock type does not ).

RUNXIN AUTOMATIC FILTER VALVE 4M3/Hr

F71Q Automatic Multiport Filter Valves

Featuring a flow rate of 2m³/h, the F71Q automatic multiport filter valve adopts a planar and corrosion resistant gasket for opening and closing. The different functions such as service, backwash and fast rinsing can be realized through parameters modifications. The F71Q1 is a timer clock type while the F71Q3 is a meter type.
Product Characteristics

    Simple structure and reliable sealing

    The distribution valve adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Fast Rinse and Brine Refill.

    No water pass the valve in regeneration in single tank type.

    Manual function

    Realize regeneration immediately by pushing manual button “Manual/Return” at any time.

    Long outage indicator

    If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on.

    The valve will automatically rotate for more than ten seconds after it is electrified

    After the valve is electrified, it will automatically rotate for more than ten seconds to turn back to the position when the electricity is cut off.

    Buttons lock

    No operations to buttons on the controller within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation.

    Interval backwash times (Suitable for F68Q/F69Q)

    It could set up interval backwash times for F68Q/F69Q up-flow regeneration valve, which means several times of services but one time of backwash. The setting of interval backwash times depends on the local water turbidity. (The lower the turbidity is, the longer of the interval backwash times can be set)

    It can choose time clock type or meter type by program selection

    When all symbols light on, press and hold “Manual/Return” and “Menu/Confirm” buttons for 5 seconds to enter the menu of valve model selection. Please set the program type in accordance with the product type. (Tim clock type by days or meter type) (Notice: The meter type product has one flow meter and flow meter cable, but the time clock type does not ).

RUNXIN AUTOMATIC FILTER VALVE 2M3/Hr

F77AS Manual Multiport Softener Control Valves

Featuring a flow rate of 15m³/h, the F77AS manual multiport softener control valve is equipped with two valve cores, one controlling the inflow of the water, the other responsible for outflow. The different functions such as service, backwash, brine and slow rinse, brine refill and fast rinse can be realized through rotating the handwheel counterclockwise to put the two pointers in the desired precision.

Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It has two valve cores. One controls inlet water, the other controls outlet water.

    No water pass the valve in regeneration in single tank type.

    Brine refill controlled by manual ball valve. （F77AS/61215，F77CS/91215）

    During service, manual ball valve will control to start the brine refill, in order to shorten the regeneration cycle time.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted.

    F77CS can be installed in top mounted or side mounted. (When side-mounted connector TOP side connected with top strainer, BOTTOM side connected with side bottom strainer) It’s up-flow for regeneration. If connector with side-mounted in upside down (TOP side connector with bottom strainer, BOTTOM side connected with top strainer) It’s for floating bed system.

    For filtration system

Drain outlet is the same size as water outlet. Block the brine line connector change the valve to F77BS filter valve.
Model:F77AS（61215）

Handle material:Plastic

Mount type:Top mount / side mount

Inlet/outlet:2"M

Drain:2"M，installed with 1.5"M flow control connector

Brine line connector:3/4"M

Mounting base:4" -8UN

Riser pipe:1.5" D-GB

Flow rate:15m³/h

Filter tank:24"--42"

Water pressure:0.2-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜2FTU

Application:Ion exchange equipment, water softener for boiler system, RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 15M^3/Hr 1.5"

N64D Manual Multiport Softener Control Valves

The N64D manual multiport softener control valve delivers a flow rate of 10m³/h. The valve is able to carry out the functions of service, backwash, brine and slow rinsing, brine refill, and fast rinsing through the rotation of the handwheel.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    No water pass the valve of single tank type in regeneration.

    Various methods for installation

    The valve can be top-mounted and side-mounted (Should be used with the side-mounted connector).

    Handle alternatives: Metal and plastic
Model:N64D（61210）

Handle material:Plastic

Mount type:Top mount / side mount
Inlet/outle:2"F

Drain:1"M

Brine line connector:1/2"M

Mounting base:2.5"-8NPSM

Riser pipe:1.5"D-GB

Flow rate:10m³/h

Filter tank:10"--30"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜5FTU

Application:Ion exchange equipment, water softener for boiler system,RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 10M3/Hr 1.5"  

F64A Manual Multiport Softener Control Valves

The F64A manual multiport softener control valve operates with a flow rate of 4m³/h. It carries out the functions of service, backwash, brine and slow rinse, brine refill, and fast rinse. The functions can be switched by rotating the handwheel.
Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It combines with Service, Backwash, Brine & Slow Rinse, Brine Refill and Fast Rinse.

    No water pass the valve of single tank type in regeneration.

    Various methods for installation

    The valve can be top-mounted and side-mounted (Should be used with the side-mounted connector).

    Handle alternatives: Metal and plastic

Model:F64A1/A2（61104/ 61204）

Handle material:Metal/plastic

Mount type:Top mount

Inlet/outle:1"F

Drain:1/2"M

Brine line connector:3/8"M

Mounting base:2.5"-8NPSM

Riser pipe:1.05"OD

Flow rate:4m³/h

Filter tank:6"--18"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:Down-flow regeneration＜5FTU

Application:Ion exchange equipment, water softener for boiler system,RO pretreatment system

RUNXIN MANUAL SOFTENER VALVE 6M3/Hr 1"  

Product Characteristics

    Simple structure and reliable sealing

    It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. It has two valve cores. One controls inlet water, the other controls outlet water.

    No water pass the valve in regeneration in single tank type.

    Brine refill controlled by manual ball valve. （F77AS/61215，F77CS/91215）

    During service, manual ball valve will control to start the brine refill, in order to shorten the regeneration cycle time.

    Two ways for installation

    Use side-mounted connector to change the valve from top-mounted to side-mounted.

    F77CS can be installed in top mounted or side mounted. (When side-mounted connector TOP side connected with top strainer, BOTTOM side connected with side bottom strainer) It’s up-flow for regeneration. If connector with side-mounted in upside down (TOP side connector with bottom strainer, BOTTOM side connected with top strainer) It’s for floating bed system.

    For filtration system

Drain outlet is the same size as water outlet. Block the brine line connector change the valve to F77BS filter valve.
Model:51215(F77BS)

Inlet/outlet:2"M

Drain:2"M

Base:4"-8UN

Riser pipe:1. 5" D-GB

Water treatment capacity:15 m³/h

Tank diameter range:10"~30"

Water pressure:0.2MPa～0.6MPa

Water temperature:5℃～50℃

Water turbidity:＜20FTU

Environment temperature:5℃～50℃

Relative umidity:≤95％(25℃)

RUNXIN MANUAL FILTER VALVE 15M3/Hr 1.5"

N56D Manual Multiport Filter Valve

The N56D manual multiport filter valve provides a flow rate of 10m³/h and adopts a corrosion resistant gasket for opening and closing. It can be applied as a service, backwash, or fast rinse valve. It can also work under pressure. With a rotating handwheel, you can easily switch the settings without turning off the pump. The filter can be used in residential filtration systems, swimming pool filtrating and RO pretreatment filtration systems.
Model:N56D1/D2（51110/ 51210）

Handle material:Metal/plastic

Mount type:Top mount / side mount

Inlet/outlet:2"F

Drain:2"F

Mounting base:4"-8UN

Riser pipe:1.5"D-GB

Flow rate: 10m³/h

Filter tank: 10"--24"

Water pressure:0.15-0.6Mpa

Water temperature:5-50℃

Water turbidity:＜20FTU

Application:Manganese and iron removal

Filter media:Quartz sand, activated carbon, manganese sand

RUNXIN MANUAL FILTER VALVE 10M3/Hr 1.5"

F56A Manual Multiport Filter Valve

The F56A manual multiport filter valve features a flow rate of 4m³/h and utilizes a corrosion resistant gasket for opening and closing functions. It can be used as a service, backwash, and fast rinse valve, even under pressure. With a handle, you can switch the settings easily without turning off the pump or the power. When selecting a valve setting, make sure to always depress the handle before turning.
Model: F56A1/A2（51104/51204）

Handle material: Metal/plastic

Mount type: Top mount

Inlet/outlet: 1"F

Drain: 1"F

Mounting base: 2.5"-8NPSM

Riser pipe: 1.05"OD

Flow rate: 4m³/h

Filter tank: 6"--12"

Water pressure: 0.15-0.6Mpa

Water temperature: 5-50℃

Water turbidity: ＜20FTU

Application: Activated carbon filter, sand filter
Filter media: Quartz sand, activated carbon

RUNXIN MANUAL FILTER VALVE 4M3/Hr 3/4"

Model: 51106(F56F)

Inlet/outlet: 1" F

Drain: 1" F

Base:2.5"-8NPSM

Riser pipe: 1" D-GB

Water treatment capacity: 6 m³/h

Tank diameter range: 6"`~14"

Water pressure: 0.15MPa～0.6MPa

Water temperature: 5℃～50℃

Water turbidity: ＜20FTU

Environment temperature: 5℃～50℃

Relative Humidity: ≤95％(25℃)

Top Categories

Cooperation